1. You are here:  
  2. Journals
  3. 2023
  4. Stroitel'nye Materialy №10-2023

Stroitel'nye Materialy №10-2023

Number of journal: 10-2023
DOI: https://doi.org/10.31659/0585-430X-2023-818-10

 

Table of contents:

Concrete and reinforced concrete in industrial and civil engineering  
S.N. LEONOVICH, K.B. STROKIN, V.V. MALYUK
Durability of Concrete in Aggressive Environments of XF4 Class. Design and Forecasting
 4-8
InterConPan-2023 in Novosibirsk: Integration of Scientific Research and Technical Innovations into Industrial Housing Construction (Information) 9-14
S.S. KAPRIELOV, A.V. SHEINFELD, S.I. IVANOV
The Experience of Concreting a Massive Dense-Reinforced Structure with the Provision of Thermal Crack Resistance
 15-24
V.V. MALYUK, V.D. MALYUK, S.V. VAVRENYUK, S.V. LEONOVICH
Method for Assessing the Durability of Concrete of Offshore Structures at the Construction Stage
 25-28
M.A. GONCHAROVA, A.G. ZAEVA, A.V. KOMARICHEV, P.V. MONASTYREV
Development of Compositions of Composite Materials for Operation Under the Influence of Aggressive Environments
 29-35
   
Gypsum building materials  
The XI International Scientific and Practical Conference “Increasing the Efficiency of Production and Use of Gypsum Materials and Products” was held in Karachay-Cherkessia (Information) 36-41
A.F. GORDINA, G.I. YAKOVLEV, G.N. PERVUSHIN, A.N. GUMENIUK, V.M. UKRAINTSEVA, A.F. BURYANOV
Non-Autoclaved Aerated Concrete Based on Sulfate-Containing Technogenic Waste
 42-46
N.I. KOZHUKHOVA, R.A. GLAZKOV, A.I. KOLOMYTCEVA, I.S. NIKULIN, A.V. CHEREVATOVA
Effect of Citrogypsum on Shrinkage in Slag Cements
 47-51
M.S. GARKAVI, A.V. ARTAMONOV, E.V. KOLODEZHNAYA, S.A. DERGUNOV, S.V. SERIKOV
Mechanochemical Synthesis of Composite Anhydrite Binders
 52-57
N.I. ALFIMOVA, S.Yu. PIRIEVA
Study of the Effect of Recipe and Technological Parameters for Water Absorption of Pressed Citrogypsum-Based Materials
 58-62
   
Materials and technologies  
V.N. SHALIMOV, A.V. CYBENKO, I.N. GOGLEV, S.A. LOGINOVA
Investigation of Chemical Resistance of PVC Membranes for Engineering Waterproofing
 63-69
15 years of Association of Ceramic Wall Materials Manufacturers (ACWMM) (Information) 70-72
A.V. PCHELNIKOV, A.P. PICHUGIN
Ensuring Mechanical Strength of Protective Paint Coatings of Steel Metal Structures
 73-77
P.A. FEDOROVP.A. FEDOROV, D.A. SINITSIN, G.Yu. SHAGIGALIN
Use of Dust Entrainment from the Gas-Cleaning System of a Cladder of Mineral Wood Production for Clinker-Free Binder
 78-84
A.P. PUSTOVGAR, A.Yu. ABRAMOVA, N.P. ANDREEVA
Research of the Effectiveness and Durability of Sol-Silicate Facade Paints		 85-90
I.V. STEPINA, Yu.G. ZHEGLOVA
Influence of Temperature on the Degree of Modification of Wood with Organosilicon Compounds
 91-98
A.R. TUSNIN, N.V. LINKOV, A.A. KLYUKIN
Investigation of the Bearing Capacity and Deformability of Promising Joints of Wooden Structures Using Composite Materials
 99-108
G.V. KUZNETSOVA, N.N. MOROZOVA, D.A. ISHMUHAMETOV, A.R. MUHARLYAMOVA
Laydown Diagrams of Silicate Products on the Trolley, Taking into Account the Packaging and Energy Efficiency of Autoclave Heat Treatment
 109-115
I.O. RAZOV, V.G. SOKOLOV, A.V. DMITRIEV, S.A. ERENCHINOV
Proposal for the Installation of the Overlap During the Construction of Buildings Using Additive Technologies
 116-120
   
Results of scientific research  
T.V. CHAYKA, V.М. GAVRISH, N.I. CHERKASHINA, R.V. SIDELNIKOV, D.S. ROMANYUK
Modification of Composite Materials with Highly Dispersed WC and WO3 Powders
 121-128
Print   Email