Technological Aspects of Ensuring the Quality of Protective Coatings of Building Metal Structures

This article discusses issues related to the development of technological solutions designed to obtain protective paint and varnish coatings with high operational resistance for building metal structures. The developed technological map and scheme for creating nanostructured paint and varnish coatings on the surfaces of building metal structures are presented. These proposals complement the comprehensive approach to the development of protective paint and varnish coatings, consisting of methodological, technological and formulation solutions, and presented in other studies by the authors, which allows for its effective use in paint and varnish industry enterprises. The research results, based on the application of the developed solutions in laboratory and operational conditions, confirm the high efficiency of the developed integrated approach. Assessment of the quality of coatings in laboratory conditions showed that coating samples after 100 hours of thermal exposure retain high properties that meet the operating conditions of building metal structures. As part of production testing, it was established that the service life of nanostructured coatings increases by 1.5–2.6 times compared to traditional coatings. In this regard, the costs of repair and restoration of coatings are reduced, and their service life between repairs is increased. The introduction of the developed solutions into production will solve the problem of low operational durability of protective paint and varnish coatings of steel building metal structures operated under various influences.

A.P. PICHUGIN^1,2, Doctor of Sciences (Engineering), Professor;
V.F. KHRITANKOV¹, Doctor of Sciences (Engineering), Professor;
A.V. PCHELNIKOV², Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)

¹ Novosibirsk State University of Architecture and Civil Engineering (113 Leningradskaya Street, Novosibirsk, 630008, Russian Federation)
² Novosibirsk State Agricultural University (160, Dobroliubova Street, Novosibirsk, 630039, Russian Federation)

1. Eremin K.I. Osobennosti ehkspluatacii metallicheskikh konstrukciy promyshlennykh zdaniy [Peculiarities of operation of metal structures of industrial buildings]. Moscow: MISS-MGSU, 2012. 248 p.
2. Pchelnikov A.V. The concept of improving thequality of protective coatings of metal structuresof the agro-industrial complex. Izvestiya of higher educational institutions. Construction. 2022. No. 11 (767), pp. 38–52. (In Russian).
3. Pichugin A.P., Banul V.V., Pchelnikov A.V. Ehffektivnaya polimernaya zashchita metallicheskikh obektov agropromyshlennogo kompleksa [Effective polymer protection of metal objects in the agro-industrial complex]. Novosibirsk: Russian Academy of Natural Sciences. 2022. 125 p.
4. Pichugin A.P., Pchelnikov A.V., Khritankov V.F., Tulyaganov A.K. Evaluation of the effectiveness of the use of nano-additives in protective coatings. Stroitel’nye Materialy [Construction Materials]. 2023. No. 3, pp. 20–26. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2023-811-3-20-26
5. Khozin V.G., Abdrakhmanova L.A., Nizamov R.K. General concentration pattern of effects of nanomodification of building materials. Stroitel’nye Materialy [Construction Materials]. 2015. No. 2, pp. 25–33. (In Russian).
6. Nelubova V.V., Kuzmin E.O., Strokova V.V.Structure and properties of nanodispersed silica synthesized by the sol-gel method. Stroitel’nye Materialy [Construction Materials]. 2022. No. 12, pp. 38–44. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2022-809-12-38-44
7. Shashok Zh.S., Prokopchuk N.R. Primenenie uglerodnykh nanomaterialov v polimernykh kompoziciyakh [Application of carbon nanomaterials in polymer compositions]. Minsk: BSTU. 2014. 232 p.
8. Strokova V.V., Nelubova V.V., Kuzmin E.O.,Ryltsova I.G., Gubareva E.N., Baskakov P.S. Technologies of sol-gel synthesis of nanosilicaas a modifier of cement-based materials. Foresight analysis. Stroitel’nye Materialy [Construction Materials]. 2023. No. 3, pp. 43–72. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2023-811-3-43-72
9. Loganina V.I., Frolov M.V., Mazhitov E.B. Influence of protective and decorative coatings based on sol-silicate paints on the moisture regime of external walls of buildings. Construction and Geotechnics. 2021. Vol. 12. No. 4, pp. 103–114. (In Russian). DOI: 10.15593/2224-9826/2021.4.08
10. Loganina V.I., Sergeeva K.A. Evaluation of superhydrophobic properties of coatings based on acrylic resin. Regional’naya arkhitektura i stroitel’stvo. 2020. No. 1, pp. 98–103. (In Russian).
11. Mokrova M.V., Matveeva L.Yu., Letenko D.G., Strogonov Yu.A. Nanomodified thermal insulating gas gypsum: composition, properties, structure. Izvestiya of higher educational institutions. Construction. 2022. No. 3, pp. 25–32. (In Russian).
12. Matveeva L.Yu., Mokrova M.V., Letenko D.G. Structure and properties of nanomodified high-strength gypsum for architectural products and stucco. Izvestiya of higher educational institutions. Construction. 2022. No. 2, pp. 42–50. (In Russian).
13. Kuznetsova T.S., Pasko T.V., Burakov A.E. Study of the influence of pH on the sorption properties of nanostructured graphene-containing composite materials modified with polyaniline in the processes of extracting pollutants of various chemical natures. Perspectivnye materialy. 2023. No. 1, pp. 28–36. (In Russian).DOI: 10.30791/1028-978X-2023-1-28-36
14. Selyaev V.P., Nizina T.A., Nizin D.R., Kanaeva N.S. Accumulation kinetics in the structure of polymeric materials during natural climatic aging. International Journal for Computational Civil and Structural Engineering. 2022. No. 1, pp. 99–108. DOI: 10.22337/2587-9618-2022-18-1-99-108
15. Loganina V.I., Mazhitov E.B. Assessment of the durability of coatings based on sol-silicate paint. Regional’naya arkhitektura i stroitel’stvo. 2020. No. 2, pp. 33–40. (In Russian).