Modeling and Experimental Study of Packing Density of Foam Glass Concrete

Number of journal: 11-2023
Autors:

Panchenko A.I.,
Mikhailov V.A.

DOI: https://doi.org/10.31659/0585-430X-2023-819-11-95-99
УДК: 666.189.3

 

AbstractAbout AuthorsReferences
The paper deals with the process of production and properties of foam glass concrete – a composite material consisting of modified gypsum binder and granulated foam glass as an aggregate. Foam glass concrete has high strength, durability, environmental friendliness and low thermal conductivity, which makes it a promising material for wall structures. Optimal packing densities were obtained by using programs developed by the authors in the Python programming language to calculate the optimal diameters of three fractions of granular foam glass in an orthogonal or hexagonal packing model. The compressive and flexural strength and thermal conductivity coefficient were investigated on samples of different compositions. The value of the thermal conductivity coefficient of the foam glass concrete was reduced due to the air-entraining additive. In conclusion, the optimum composition of foam glass concrete was proposed taking into account all investigated parameters.
A.I. PANCHENKO, Doctor of Sciences (Engineering), Professor (This email address is being protected from spambots. You need JavaScript enabled to view it.),
V.A. MIKHAILOV, Postgraduate student (This email address is being protected from spambots. You need JavaScript enabled to view it.)

National Research Moscow State University of Civil Engineering (26, Yaroslavskoe Highway, Moscow, 129337, Russian Federation)

1. Zakrevskaya L.V., Popov M.Yu. Lightweight concretes on the basis of granulated foam glass. Arhitektura. Stroitel’stvo. Obrazovanie. 2015. No. 1, pp. 26–31. (In Russian).
2. Awham M., Hamada Ruqaya F. Hameed using the glass and rubber waste as sustainable materials to prepare foamed concrete with improved properties. IOP Conf. Series: Materials Science and Engineering. 2020. No. 881. DOI: https://doi.org/10.1088/1757-899X/881/1/012188
3. Ivanova S.M., Chulkova I.L. Composite cement foam glass concrete Stroitel’nye Materialy [Construction Materials]. 2005. No. 10, pp. 22–28. (In Russian).
4. Orlov A.D. Granulated glass-ceramic foam as a promising aggregate for a new generation of energy-efficient concrete Promyshlennoe i grazhdanskoe stroitel’stvo. 2016. No. 12, pp. 13–15. (In Russian).
5. Sopegin G.В. Influence of ground fractionated foam glass on the properties of gypsum binder and dry building mixtures. Molodye Uchenye – Razvitiju Nacional’noj Tehnologicheskoj Iniciativy (POISK). 2020. No. 1, pp. 626–629. (In Russian).
6. Orlov A.D., Nezhikov A.V. Glass-ceramic foam as n aggregate of high-tech lightweight concrete. Vestnik NIC Stroitelstvo. 2017. No. 3, pp. 163–171. (In Russian).
7. Chulkova I.L., Kadtsyn R.A., Kadtsyn A.R. Foam-glass and foam-ceramics as aggregates for cellular concrete. Collection of international scientific and practical conference «Architectural-building and road-transport complexes: problems, prospects, innovations». Omsk. 2019, pp. 469–472. (In Russian).
8. Ilyina L.V., Tatsky L.N., Molodin V.V., Kolesova T.D. Lightweight concrete with foam-glass-crystalline aggregate modified with micro- and nano-silica. Ekspert: teoriya i praktika. 2023. No. 3 (22), pp. 80–85. (In Russian).
9. Ketov Yu.A., Slovikov S.V. Syntactic polymercomposites highly filled with granulated foamglass. Computational Nanotechnology. 2019. No. 3. pp. 39–46. (In Russian).
10. Rezaev R.O., Borodulya N.A., Sebelev I.M., Smirnova E.I., Karasev N.P. Selection of concrete composition taking into account the coating thickness and packing density of aggregates. Izvestiya Vuzov. Stroitel’stvo. 2020. No. 4. pp. 22. (In Russian).
11. Stefanenko I.V., Gnedash E.E., Akchurin T.K. Optimization of granulometric composition of aggregates of heat-resistant concrete of fine-grained structure. Vestnik of Volgograd State University of Architecture and Civil Engineering. 2020. No. 4. С. 205–213. (In Russian).
12. Certificate of state registration of computer program 2023665187 Russian Federation. Calculation of optimal diameters of three fractions of granulated foam glass to achieve maximum packing densityof foam glass concrete / Mikhailov V.A., Panchenko A.I.; applicant and right holder NationalResearch Moscow State Construction University. No. 2023663616. Applied 29.06.2023; Published 12.07.2023. (In Russian).
13. Puzrenkov A.N., Salnikov I.I. Methods of packing bulk materials consisting of elements of spherical shape. Nauchnoe Obozrenie. Pedagogicheskie Nauki. 2019. No. 3 (part 2), pp. 79–82. (In Russian).
14. Bazhenova O.O. Optimization of packing density of aggregates in concrete. International Scientific and Technical Conference of Young Scientists. Belgorod. 2020, pp. 1938–1941. (In Russian).
15. Chen C., Bai S., Huang Y., Lam L., Yao Y., Keer L.M. 3D random packing algorithm of ellip-soidal particles based on the Monte Carlo method. Magazine of Concrete Research. 2021. Vol. 73. No. 7, pp. 343–355. DOI: https://doi.org/10.1680/jmacr.20.00228

For citation: Panchenko A.I., Mikhailov V.A. Modeling and experimental study of packing density of foam glass concrete. Stroitel’nye Materialy [Construction Materials]. 2023. No. 11, pp. 95–99. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2023-819-11-95-99


Print   Email