Structural Synthesis of the Technological Complex of Clay Preparation Under Conditions of Unsteady Humidity of Raw Materials in the Production of Expanded Clay

Number of journal: 5-2022
Autors:

Galitskov K.S.,
Fadeev A.S.

DOI: https://doi.org/10.31659/0585-430X-2022-802-5-40-44
УДК: 666.3-1:001.891.592

 

AbstractAbout AuthorsReferences
The article considers the approach of structural modeling of the technological complex for the preparation of clay raw materials in conditions of unsteadiness of its humidity. The main dependencies characterizing each of the stages of redistribution are revealed, input and output coordinates, as well as disturbing effects are determined. Taking into account the accepted assumptions and current technological limitations, a structural diagram of the clay preparation site as a generalized control object has been developed. In the developed model, two main parameters are structurally distinguished – the moisture content of clay raw materials formed at each stage of processing to assess the effectiveness of its preparation, and the productivity of equipment involved in the technological chain to ensure consistency of operating modes. A computational model of the technological section of clay preparation has been created, the use of which will allow experimental studies of the formation of the final moisture content of clay raw materials, and the results of the experiments will be taken into account in the further synthesis of the system of automatic stabilization of the moisture content of clay raw materials in the production of expanded clay with specified quality indicators.
K.S. GALITSKOV, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
A.S. FADEEV, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)

Samara State Technical University (224, Molodogvardeyskaya, Samara, 443110, Russian Federation)

1. Gorin V.M., Tokareva S.A., Vytchikov Yu.S., Belyakov I.G., Shiyanov L.P. Use of wall stones made of undisturbed expanded clay concrete in housing construction. Stroitel’nye Materialy [Construction Materials]. 2010. No. 2, рр. 15–18. (In Russian).
2. Gorin V.M., Tokareva S.A., Kabanova M.K. High-strength expanded clay and ceramic powder for load-bearing structures and road construction. Stroitel’nye Materialy [Construction Materials]. 2010. No. 1, рр. 9–11. (In Russian).
3. Gorin V.M., Tokareva S.A., Kabanova M.K. Wall expanded clay concrete structures – a promising material for industrial housing construction. Stroitel’nye Materialy [Construction Materials]. 2011. No. 3, рр. 55–58. (In Russian).
4. Ledyakin A.S., Liaskin O.V. Prospects for application of expanded clay in Russia. Topical issues of architecture and construction: Collection of works of the seventeenth International Scientific and Technical Conference. Saransk. 2018, рр. 196–199. (In Russian).
5. Galitskov K. Intelligent management of high-technology equipment for the manufacture of concrete and ceramic materials and products. Integration, Partnership and Innovation in Construction Science and Education: Proceedings VI International Scientific Conference. MATEC Web of Conferences. 2018. 03043. DOI: https://doi.org/10.1051/matecconf/201825103043
6. Galitskov K.S., Borisov V.A., Saburov V.V. Generalized structure of the production of expanded clay as a control object. Traditions and innovations in construction and architecture. Construction and construction technologies: Collection of articles of the 78th All-Russian Scientific and Technical Conference. Samara. 2021, рр. 1026–1033. (In Russian).
7. Golovko A.O., Nusratullina D.B., Guryanova V.R. Features of the technology of expanded clay from local raw materials. Modern technologies of composite materials: Materials of the IV All-Russian Scientific and Practical Conference with international participation. Ufa. 2019, рр. 263–266. (In Russian).
8. Onatsky S.P. Proizvodstvo keramzita [Production of expanded clay]. Мoscow: Stroyizdat, 1987. 333 p.
9. Galitskov S., Galitskov K., Samokhvalov O. Computer modeling of the dynamics of energy consumption during expanded clay burning. Complex Systems: Control and Modeling Problems: Proceedings 21st International Conference. Samara. 2019, рр. 401–406. DOI: https://doi.org/10.1109/CSCMP45713.2019.8976656
10. Galitskov S.Ya., Samokhvalov O.V. Control conditions for a rotary kiln that produces expanded clay with a given strength. Traditions and innovations in construction and architecture: Collection of articles of the 71st All-Russian Scientific and Technical Conference. Samara. 2014, рр. 1009–1011. (In Russian).
11. Galitskov K.S., Samokhvalov O.V., Fadeev A.S. Optimization of burning production process of ceramsite with specified density. Environment, Technology, Resources: Proceedings of the 11th International Scientific and Practical Conference. 2017, рр. 57–61. DOI: https://doi.org/10.17770/etr2017vol3.2569
12. Fadeev A.S., Galitskov S.Ya., Danilushkin A.I. Simulation of expanded clay swelling in a rotary furnace as a control object. Vestnik of Samara State Technical University, Series “Technical Sciences”. 2011. No. 2, рр. 160–168. DOI: https://doi.org/10.14498/tech.2011.2.%25u (In Russian).
13. Samohvalov O.V. Algorithm of operation of multivariate automatic control system for calcination of expanded clay. Mechanization and automation of construction: Collection of articles. Samara. 2020, рр. 343–348. (In Russian).
14. Fadeev A.S., Galitskov K.S., Galitskov S.Ya. Structure of intelligent support system for operational control of expanded clay production of specified quality. Interstroymeh-2018: Collection of articles of the XXI International Scientific and Technical Conference. Moscow. 2018, рр. 270–273. (In Russian).
15. Fadeev A.S., Minsafin R.R. Mathematical modeling of the clay preparation process as an object of automation of the production of expanded clay. Traditions and innovations in construction and architecture. Construction and construction technologies: Collection of articles of the 79th All-Russian Scientific and Technical Conference. Samara. 2022, рр. 950–957. (In Russian).

For citation: Galitskov K.S., Fadeev A.S. structural synthesis of the technological complex of clay preparation under conditions of unsteady humidity of raw materials in the production of expanded clay. Stroitel’nye Materialy [Construction Materials]. 2022. No. 5, pp. 40–44. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2022-802-5-40-44


Print   Email