AbstractAbout AuthorsReferences
Studies have shown that the technology of filtration pressing makes it possible to obtain roofing and facing products of increased strength and durability on a cement-sand base. A significant decrease in the water-cement ratio under the influence of pressing pressure with the simultaneous removal of excess water makes it possible to provide a high density of fine-grained concrete due to the absence of large pores and microporous structure of cement stone, which is similar to the structure of natural stone materials or high-strength concretes of a new generation. One of the main advantages of the filtration pressing technology in the production of cement-sand tiles in comparison with traditional technologies of vibration shaping and extrusion is the possibility of a significant reduction in the thickness and weight of the resulting product while maintaining its strength and performance characteristics, which greatly facilitates the technology of installation of these products at the construction site and reduces the total cost of a tiled roof device.
E.A. SINITSINA, Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.),
T.V. PECHENKINA, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
L.N. LOMAKINA, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
O.S. DOROFEEVA, Postgraduate student (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.V. NEDOSEKO, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
T.V. PECHENKINA, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
L.N. LOMAKINA, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
O.S. DOROFEEVA, Postgraduate student (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.V. NEDOSEKO, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
Ufa State Petroleum Technological University (1, Kosmonavtov Street, Ufa, 450062, Russian Federation)
1. Gorchakov G.I., Bazhenov Yu.M. Stroitel’nyye materialy [Construction Materials]. Moscow: Stroyizdat. 1986. 688 p.
2. Bondarenko I.N., Neiman S.M., Sozinov S.V. Modern roofing materials and roof structures used for residential and industrial buildings. Vestnik MGSU. 2010. No. 4–5, pp. 31–37.
3. Umansky N.L., Falkov I.A. Proizvodstvo i primenenie cementno-peschanoj cherepicy [Production and use of cement-sand tiles]. Moscow: Promstroyizdat. 1957. 104 p.
4. Bazhenov Yu.M. Tekhnologiya betona, stroitel’nykh izdeliy i konstruktsiy [Technology of concrete, building products and structures]. Moscow: ASV. 2004. 236 p.
5. Lyashkevich I.M., Mitrofanov A.A. Filter-press technology for the production of gypsum fiber boards. Stroitel’nye Materialy [Construction Materials]. 1987. No. 1, pp. 7–9. (In Russian).
6. Dzhakupov K.K., Lyashkevich I.M., Babkov V.V. and other. Tekhnologiya fil’trpressovaniya v proizvodstve oblitsovochnykh izdeliy [Technology of filter pressing in the production of facing products]. Samara: Publishing house SOS “Construction” RIA, 1999. 256 p.
7. Itskovich S.M., Lyashkevich I.M. Theory of the process of pressing products from powders and suspensions. Tekhnika, tekhnologiya, organizatsiya i ekonomika stroitel’stva. 1987. Iss. 13, pp. 17–25. (In Russian).
8. Ermilova E.Yu., Korenkova S.F. Simulation of the process of filtration pressing of microfilled thin-walled products. [Electronic resource]. URL: https://st-par.ru/info/stati-o-krovle/cementno-peschanaya-cherepica/
9. Bazhenov Yu.M. Tekhnologiya betonov [Concrete technology]. Moscow: ASV. 2007. 528 p.
10. Kaprielov S.S., Travush V.I., Karpenko N.I. et al. Modified concretes of a new generation in the structures of the Moscow International Business Center “Moscow-City”. Stroitel’nye Materialy [Construction Materials]. 2006. No. 10, pp. 13–17. (In Russian).
11. Kaprielov S.S. General patterns of formation of the structure of cement stone and concrete with the addition of ultrafine materials. Beton i zhelezobeton. 1995. No. 4, pp. 16–20. (In Russian).
12. Babkov V.V., Komokhov P.G., Kapitonov S.M., Mirsaev R.N. The mechanism of hardening of cement binders when using fine fillers. Cement. 1991. No. 9–10, pp. 34–41.
13. Babkov V.V., Mokhov V.N., Kapitonov S.M., Komokhov P.G. Strukturoobrazovaniye i razrusheniye tsementnykh betonov [Structure formation and destruction of cement concretes]. Ufa: State Unitary Enterprise “Ufimsky polygraph plant”. 2002. 376 p.
14. Bazhenov Yu.M., Alimov L.A., Voronin V.V. Nanomodifitsirovannyye tsementnyye betony [Nanomodified cement concretes]. Moscow: ASV. 2017. 198 p.
15. Kalashnikov V.I. Evolution of the development of compositions and changes in the strength of concrete. Concrete of the present and future. Part 1. Changing the composition and strength of concrete. Stroitel’nye Materialy [Construction Materials]. 2016. No. 1-2, pp. 96–103. (In Russian).
16. Kaprielov S.S., Travush V.I., Karpenko N.I. and others. Modified high-strength concretes of classes B80 and B90 in monolithic structures. Stroitel’nye Materialy [Construction Materials]. 2008. No. 3, pp. 9–13. (In Russian).
17. Gusev B.V. Concrete with fillers of various dispersion and their nanomodification. Nanotekhnologii v stroitel’stve. 2019. V. 11. No. 4, pp. 384–393. (In Russian).
18. Sinitsin D.A., Khalikov R.M., Bulatov B.G. Technological approaches to directed structure formation of building nanocomposites with increased corrosion resistance. Nanotekhnologii v stroitel’stve. 2019. Vol. 11. No. 2, pp. 153–164. DOI: 10.15828/2075-8545-2019-11-2-153-164
19. Sinitsina E.A., Nedoseko I.V. The use of stone flour as an inert filler in heavy concrete. Problems of the building complex in Russia: Proceedings of the XXIII International Scientific and Technical Conference dedicated to the 50th anniversary of the Institute of Architecture and Civil Engineering of USPTU. Ufa. 2019, pp. 239–240. (In Russian).
20. Sinitsin D.A., Latypova R.A., Sinitsina E.A. Study of the possibility of using mineral powder as a microfiller in heavy concrete. Collection of the XXII International Conference “Problems of the Construction Complex of Russia”. Ufa. 2018, pp. 157–158. (In Russian).
2. Bondarenko I.N., Neiman S.M., Sozinov S.V. Modern roofing materials and roof structures used for residential and industrial buildings. Vestnik MGSU. 2010. No. 4–5, pp. 31–37.
3. Umansky N.L., Falkov I.A. Proizvodstvo i primenenie cementno-peschanoj cherepicy [Production and use of cement-sand tiles]. Moscow: Promstroyizdat. 1957. 104 p.
4. Bazhenov Yu.M. Tekhnologiya betona, stroitel’nykh izdeliy i konstruktsiy [Technology of concrete, building products and structures]. Moscow: ASV. 2004. 236 p.
5. Lyashkevich I.M., Mitrofanov A.A. Filter-press technology for the production of gypsum fiber boards. Stroitel’nye Materialy [Construction Materials]. 1987. No. 1, pp. 7–9. (In Russian).
6. Dzhakupov K.K., Lyashkevich I.M., Babkov V.V. and other. Tekhnologiya fil’trpressovaniya v proizvodstve oblitsovochnykh izdeliy [Technology of filter pressing in the production of facing products]. Samara: Publishing house SOS “Construction” RIA, 1999. 256 p.
7. Itskovich S.M., Lyashkevich I.M. Theory of the process of pressing products from powders and suspensions. Tekhnika, tekhnologiya, organizatsiya i ekonomika stroitel’stva. 1987. Iss. 13, pp. 17–25. (In Russian).
8. Ermilova E.Yu., Korenkova S.F. Simulation of the process of filtration pressing of microfilled thin-walled products. [Electronic resource]. URL: https://st-par.ru/info/stati-o-krovle/cementno-peschanaya-cherepica/
9. Bazhenov Yu.M. Tekhnologiya betonov [Concrete technology]. Moscow: ASV. 2007. 528 p.
10. Kaprielov S.S., Travush V.I., Karpenko N.I. et al. Modified concretes of a new generation in the structures of the Moscow International Business Center “Moscow-City”. Stroitel’nye Materialy [Construction Materials]. 2006. No. 10, pp. 13–17. (In Russian).
11. Kaprielov S.S. General patterns of formation of the structure of cement stone and concrete with the addition of ultrafine materials. Beton i zhelezobeton. 1995. No. 4, pp. 16–20. (In Russian).
12. Babkov V.V., Komokhov P.G., Kapitonov S.M., Mirsaev R.N. The mechanism of hardening of cement binders when using fine fillers. Cement. 1991. No. 9–10, pp. 34–41.
13. Babkov V.V., Mokhov V.N., Kapitonov S.M., Komokhov P.G. Strukturoobrazovaniye i razrusheniye tsementnykh betonov [Structure formation and destruction of cement concretes]. Ufa: State Unitary Enterprise “Ufimsky polygraph plant”. 2002. 376 p.
14. Bazhenov Yu.M., Alimov L.A., Voronin V.V. Nanomodifitsirovannyye tsementnyye betony [Nanomodified cement concretes]. Moscow: ASV. 2017. 198 p.
15. Kalashnikov V.I. Evolution of the development of compositions and changes in the strength of concrete. Concrete of the present and future. Part 1. Changing the composition and strength of concrete. Stroitel’nye Materialy [Construction Materials]. 2016. No. 1-2, pp. 96–103. (In Russian).
16. Kaprielov S.S., Travush V.I., Karpenko N.I. and others. Modified high-strength concretes of classes B80 and B90 in monolithic structures. Stroitel’nye Materialy [Construction Materials]. 2008. No. 3, pp. 9–13. (In Russian).
17. Gusev B.V. Concrete with fillers of various dispersion and their nanomodification. Nanotekhnologii v stroitel’stve. 2019. V. 11. No. 4, pp. 384–393. (In Russian).
18. Sinitsin D.A., Khalikov R.M., Bulatov B.G. Technological approaches to directed structure formation of building nanocomposites with increased corrosion resistance. Nanotekhnologii v stroitel’stve. 2019. Vol. 11. No. 2, pp. 153–164. DOI: 10.15828/2075-8545-2019-11-2-153-164
19. Sinitsina E.A., Nedoseko I.V. The use of stone flour as an inert filler in heavy concrete. Problems of the building complex in Russia: Proceedings of the XXIII International Scientific and Technical Conference dedicated to the 50th anniversary of the Institute of Architecture and Civil Engineering of USPTU. Ufa. 2019, pp. 239–240. (In Russian).
20. Sinitsin D.A., Latypova R.A., Sinitsina E.A. Study of the possibility of using mineral powder as a microfiller in heavy concrete. Collection of the XXII International Conference “Problems of the Construction Complex of Russia”. Ufa. 2018, pp. 157–158. (In Russian).
For citation: Sinitsina E.A., Pechenkina T.V., Lomakina L.N., Dorofeeva O.S., Nedoseko I.V. Filter pressing technology in the production of roofing and facing products of increased strength and durability. Stroitel’nye Materialy [Construction Materials]. 2022. No. 3, pp. 74–82. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2022-800-3-74-82