Complex Processing of Minerals of Chrysotile-Asbestos Deposits

Number of journal: 12-2022
Autors:

Punenkov S.E.
Kozlov Yu.S.

DOI: https://doi.org/10.31659/0585-430X-2022-809-12-10-14
УДК: 622.637.6

 

AbstractAbout AuthorsReferences
The analysis of the state and prospects of development of the chrysotile asbestos industry with a focus on the complex processing of mineral components of the chrysotile asbestos deposit is presented. This is necessary to expand the range of products, reduce the cost of dumping and reclamation, reduce the environmental burden from the industry in the region. The complexity of resource processing will also provide the country’s chrysotile-asbestos industry with an increase in economic efficiency and competitiveness. In this regard, PJSC “Uralasbest” solved the problem of processing one of the valuable rock-forming minerals of the Bazhenov asbestos deposit - gabbro-diabase, which was previously sent to dumps. The purpose of this work was the production of basalt fiber and new products based on it – heat and sound insulation materials for the construction industry, as well as a hydroponic substrate for use in agriculture for the cultivation of vegetable, fruit, ornamental and flower crops.
S.E. PUNENKOV1,2, Candidate of Sciences (Engineering), Сhief Technologist (This email address is being protected from spambots. You need JavaScript enabled to view it.);
Yu.S. KOZLOV3, Student

1 PJSC “Uralasbest” (66, Uralskaya Street, Asbest city, 624260, Russian Federation)
2 Ural State Mining University (30, Kuybysheva Street, Ekaterinburg, 620144, Russian Federation)
3 Ural Federal University named after the first President of Russia B.N. Yeltsin (19, Mira Street, Ekaterinburg, 620002, Russian Federation)

1. Kobzhasov A.K., Abdrakhmanova D.K., Punenkov S.E. Complex processing of chrysotile-asbestos ores in a market economy. Promyshlennost’ Kazakhstana. 2008. No. 2, pp. 24–27. (In Russian).
2. Punenkov S.E. The current state and prospects for the development of the chrysotile-asbestos industry in Brazil. Stroitel’nye Materialy [Construction Materials]. 2011. No. 5, pp. 73–76. (In Russian).
3. Jafarov N.N., Jafarov F.N. Efficient technology for the extraction of useful components is an important factor in the preparation of deposits for industrial development. Gorno-geologicheskii zhurnal. 2017. No. 3–4 (51–52), pp. 7–9. (In Russian).
4. Shkarednaya S.A., Kaskevich T.M. Asbestos-containing products and building materials. Gorno-geologicheskiy zhurnal. 2005. No. 2, pp. 37–39. (In Russian).
5. Ovcharenko E.G. Analiz sostoyaniya rynka teploizolyatsionnykh materialov v Rossii. [Analysis of the state of the market of heat-insulating materials in Russia]. Moscow: Teploproekt. 2017. 101 p.
6. Dzhigiris D.D., Makhova M.F. Osnovy proizvodstva bazal’tovykh volokon i izdeliy [Fundamentals of the production of basalt fibers and products]. Moscow: Teploenergetik. 2002. 416 p.
7. Matyukhin V.I., Yaroshenko Yu.G., Matyukhina A.V., Dudko V.A., Punenkov S.E. The use of natural gas in the heating of cupola-type shaft furnaces to improve the energy efficiency of technological processes of iron smelting. Izvestiya vysshikh uchebnykh zavedeniy. Chernaya metallurgiya. 2017. Vol. 60. No. 8, pp. 629–636. (In Russian).
8. Punenkov S.E., Kozlov Yu.S. Chrysotile-asbestos and resource saving in the chrysotile-asbestos industry. Gornyy zhurnal Kazakhstana. 2022. No. 4, pp. 8–14. (In Russian).
9. Arabov A.R., Polishchuk E.Yu. Thermal insulation and decorative possibilities of thermal panels. Krovel’nyye i izolyatsionnyye materialy. 2020. No. 2, pp. 20–24. (In Russian).
10. Vorobyov A. Phenol-formaldehyde resins. Komponenty i tekhnologii. 2003. No. 7, pp. 176–179. (In Russian).
11. Yartsev V.P., Polyakova A.V. Analysis of temperature distribution over the thickness of structures with expanded polystyrene and mineral wool insulation. Stroitel’nyye materialy, oborudovaniye, tekhnologii XXI veka. 2021. No. 5, pp. 57–63. (In Russian).
12. Petropavlovskaya V.В., Zavad’ko M.Yu., Novichenkova T.B., Petropavlovskii K.S., Buryanov A.F. Gypsum modified compositions with the use of activated basalt filler. Stroitel’nye Materialy [Construction Materials]. 2020. No. 7, pp. 10–17. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2020-782-7-10-17
13. Dzhigiris D.D., Makhov M.F. Osnovy proizvodstva bazal’tovykh volokon i izdelii [Basics of production of Basalt fibers and products]. Moscow: Teploenergetik. 2002. 416 p. (In Russian).
14. Matyukin V.I., Zemlyanoi K.G., Zhuruavlev S.J., Punenkov S.E. Oxidation kinetics of metallurgical coke in a smelter of cupola Type. Coke and Chemistry. 2021. No. 6, pp. 23–27. https://doi.org/10.3103/S1068364X2106003X
15. Matyukhin V.I., Yaroshenko Yu.G., Matyukhina A.V., Punenkov S.E., Dubko V.A. Improving the energy efficiency of technological processes for smelting cast iron in mine furnaces of the vahranok type. Modern scientific achievements of metallurgical heat engineering and their implementation in industry: a collection of reports of the II International Scientific and Practical Conference dedicated to the 90th anniversary of the merit. Worker of Science and Technology of the Russian Federation Yu.G. Yaroshenko, Yekaterinburg. UrFU. 2018. pp. 131–139.
16. Abdoulaye Diedhiou, Libasse Sow, Adama Dione. Comparative study of physical-chemical characteristics of diack basalt and bandia limestone for use in railway engineering. Geomaterials. 2022. Vol. 12. No. 2, pp. 1450–1454.
17. Bessonov I.V., Starostin A.V., Oskina V.M. On the shape stability of fibrous insulation. Vestnik MGSU. 2011. No. 3, pp. 134–139. (In Russian).

For citation: Punenkov S.E. Kozlov Yu.S. Complex processing of minerals of chrysotile-asbestos deposits. Stroitel’nye Materialy [Construction Materials]. 2022. No. 12, pp. 10–14. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2022-809-12-10-14


Print   Email