Studies of Gypsum Composites for Low-Rise Construction

The possibility of practical use of the results of exploratory experiments to study the dependence of the resistance of gypsum composites to destruction on the parameters of their macrostructure for the development of compositions of building products for low-rise construction is considered. The results of testing gypsum composites on fillers of granular, fibrous and lamellar-needle form, some of which relate to man-made (technogenic) waste (granite screening and wood chips), are presented. It is shown that the strength potential of the obtained composites makes it possible to consider them as a material for the manufacture of construction products intended for the construction of low-rise buildings. The direction of further research is indicated as the development of procedures for the design and synthesis of structures of new resource-efficient structural and structural-thermal insulation gypsum composites for low-rise construction.

A.I. MAKEEV, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
E.M. CHERNYSHOV , Doctor of Sciences (Engineering), Academician of RAACS

Voronezh State Technical University (84, 20-letiya Oktyabrya Street, 394006, Voronezh, Russian Federation)

1. Slavcheva G.S. 3D-build printing today: potential, challenges and prospects for implementation. Stroitel’nye Materialy [Construction Materials]. 2021. No. 5, pp. 28–36. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2021-791-5-28-36
2. Buryanov A.F. Gypsum, its research and application from P.P. Budnikov to the present day. Stroitel’nye Materialy [Construction Materials]. 2005. No. 9, pp. 46–48. (In Russian).
3. Ivaschenko Yu.G., Evstigneev S.A., Strakhov A.V. The role of fillers and modifiers in the formation of the structure and properties of composites based on gypsum binder. Reliability and durability of building materials, structures and foundations: Materials of the VI International Scientific and Technical Conference. Volgograd. 2011, pp. 159-162. (In Russian).
4. Belov V.V., Bur’yanov A.F., Yakovlev G.I. et al. Modifikatsiya struktury i svoystv stroitel’nykh kompozitov na osnove sul’fata kal’tsiya: monografiya [Modification of the structure and properties of building composites based on calcium sulfate: monograph / under total. ed. Buryanova A.F.] Moscow: De Nova. 2012. 195 p.
5. Babkov V.V., Latypov V.M., Lomakina L.N., Shigapov R.I. Modified gypsum binders of increased water resistance and gypsum-claydite-concrete wall blocks for low-rise housing construction based on them. Stroitel’nye Materialy [Construction Materials]. 2012. No. 7, pp. 4–8. (In Russian).
6. Petropavlovskii K.S., Buryanov A.F., Petropavlovskaya V.В., Novichenkova T.B. Lightened self-reinforced gypsum composites. Stroitel’nye Materialy [Construction Materials]. 2019. No. 10, pp. 40–45. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2019-775-10-40-45
7. Khozin V.G., Maysuradze N.V., Mustafina A.R., Kornyanen M.E. Influence of the chemical nature of plasticizers on the properties of gypsum paste and stone. Stroitel’nye Materialy [Construction Materials]. 2019. No. 10, pp. 35–39. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2019-775-10-35-39
8. Petropavlovskaya V.В., Zavad’ko M.Yu., Novichenkova T.B., Petropavlovskii K.S., Buryanov A.F. Gypsum modified compositions with the use of activated basalt filler. Stroitel’nye Materialy [Construction Materials]. 2020. No. 7, pp. 10–17. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2020-782-7-10-17
9. Bessonov I.V., Zhukov A.D., Gorbunova E.A. Researching of the water resistance of hydrophobized tongue-and-groove gypsum slabs. Stroitel’nye Materialy [Construction Materials]. 2021. No. 6, pp. 57–61. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2021-792-6-57-61
10. Makeev A.I. Resistance to fracture of conglomerate building composites on a gypsum binder. “Increasing the efficiency of production and use of gypsum materials and products”: collection of materials of the X International Scientific and Practical Conference. September 8–9, 2021. Voronezh, pp. 81–96. (In Russian).
11. Makeev A.I., Chernyshov E.M. Granite crushing screenings as a component factor of concrete structure formation. Part 1. Problem definition. Identification of screenings as a component factor of structure formation. Stroitel’nye Materialy [Construction Materials]. 2018. No. 4, pp. 56–60. DOI: https://doi.org/10.31659/0585-430X-2018-758-4-56-60 (In Russian).
12. Makeev A.I. Methodological foundations of the theory of design and synthesis of optimal structures of conglomerate building composites. Nauchnyy vestnik VGASU. Seriya: Fiziko-khimicheskiye problemy i vysokiye tekhnologii stroitel’nogo materialovedeniya. 2015. No. 1 (10), pp. 29–37. (In Russian).
13. Chernyshov E.M., Makeev A.I. On the problem of control of recipe-technological factors of concrete production in the problems of design and synthesis of their optimal structures. Academia. Arkhitektura i stroitel’stvo. 2018. No. 3, pp. 135–143. (In Russian).
14. Chernyshov E.M., Makeev A.I. Types of substructures in the integral polystructure of concrete and the regularities of the formation of stress field parameters in the composite (to the development of the theory of design and synthesis of structures of conglomerate building composites). Fundamental, exploratory and applied research of the RAASN on scientific support for the development of architecture, urban planning and the construction industry of the Russian Federation in 2020: Collection of scientific works of RAASN. Moscow: ASV. 2021, pp. 304–314. (In Russian).
15. Chernyshov E.M., Makeev A.I. Destruction of conglomerate building materials: basic concepts, process mechanisms, principles and patterns of management. Stroitel’nye Materialy [Construction Materials]. 2007. No. 9, pp. 63–65. (In Russian).
16. Chernyshov E.M., Makeev A.I. Modeling the stress state of structurally inhomogeneous conglomerate composites in building structures Mezhdunarodnyy zhurnal po raschetu grazhdanskikh i stroitel’nykh konstruktsiy. 2015. Vol. 11. No. 2, pp. 160–170. (In Russian).
17. Dvorkin L.I., Dvorkin O.L. Stroitel’noye materialovedeniye [Building materials science]. Mosocw: Infra-Engineering. 2013. 832 p.
18. Korneeva I.G., Emelyanova N.A. On the question of optimal reinforcement of fine-grained concrete with basalt fibers. Izvestiya vuzov. Investitsii. Stroitel’stvo. Nedvizhimost’. 2016. No. 4 (19), pp. 121–128. (In Russian).
19. Chernyshov E.M., Dyachenko E.I. Metodika otsenki vyazkosti razrusheniya silikatnykh avtoklavnykh materialov [Method for assessing the fracture toughness of silicate autoclave materials]. Voronezh. 1990. 32 p.
20. Lavlinskaya O.V., Sukhorukova S.S., Lazareva V.A., Strukova T.Yu., Melnikova E.I. Investigation of the influence of the type and size of wood filler on the properties of gypsum boards. Aktual’nyye napravleniya nauchnykh issledovaniy XXI veka: teoriya i praktika. 2014. Vol. 2. No. 2–1 (7–1), pp. 130–135.
21. Gipsovye materialy i izdeliya (proizvodstvo i primeneniye): Spravochnik [Gypsum materials and products (production and use): Handbook / Under total. ed. A.V. Ferronskaya]. Moscow: ASV. 2004. 485 p.