Sorption Properties of Modified Sosnovsky’s Hogweed

Number of journal: 10-2021
Autors:

Bruyako M.G.,
Bessonov I.V.,
Gorbunova E.A.,
Govryakov I.S.

DOI: https://doi.org/10.31659/0585-430X-2021-796-10-54-59
УДК: 666.914

 

AbstractAbout AuthorsReferences
Sorption properties of the modified Sosnovsky’s hogweed have been studied. The comparison of control samples and samples modified in a low-temperature non-equilibrium plasma is carried out. Samples of hogweed, after preliminary grinding, were dried to a constant mass in a drying cabinet, and then placed in weighing bottles. Open weighing bottles with lids were placed in desiccators with solutions of benzene and acetone. A similar test was carried out with a hogweed pretreated in a low-temperature non-equilibrium plasma. Desorption characteristics were determined in the reverse way. On the basis of obtained high sorption properties of the modified filler, it can be assumed, that composite materials based on binder, including gypsum, and Sosnovsky’s hogweed can be used for interior decoration since they contribute to the filtration and control of air humidity, thereby creating comfortable conditions for a person in the room. Processing with low-temperature non-equilibrium plasma makes it possible to obtain a more efficient material, reducing the cost, as well as energy costs for the production and processing of the filler and the product.
M.G. BRUYAKO1, Candidate Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
I.V. BESSONOV2, Candidate Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
E.A. GORBUNOVA1,2, Engineer, Master’s student (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.S. GOVRYAKOV1,2, Engineer, Graduate Student (This email address is being protected from spambots. You need JavaScript enabled to view it.)

1 National Research Moscow State University of Civil Engineering (26, Yaroslavskoye Shosse, Moscow, 129337, Russian Federation)
2 Research Institute of Building Physics of the Russian Academy of Architecture and Construction Sciences (21, Lokomotivniy Driveway, Moscow, 127238, Russian Federation)

1. Burlaka S.D., Bruyaka M.R. The use of natural and artificial sorbents for the treatment of oily wastewater. Nauchnie Trudy KubGTU. 2017. No. 7, pp. 71–77. (In Russian).
2. Burenina O.N., Savvinova M.E. Sources of mineral raw materials for the production of building materials of the republic of Sakha (Yakutia). AIP Conference Proceedings. 2017. Vol. 1915. Iss. 1. DOI: 10.1063/1.5017352
3. Musikhin P.V., Sigaev A.I. Investigation of the physical properties and chemical composition of Sosnovsky hogweed and obtaining a fibrous semi-finished product from it. Sovremennye tehnologii. 2006. No. 3, pp. 65–67. (In Russian).
4. Jakubska-Вusse A., Śliwiński М., Kobyłka М. Identification of bioactive components of essential oils in Heracleum sosnowskyi and Heracleum mantegazzia-num (Apiaceae) // Archives of Biological Sciences. 2013. Vol. 65 (3), pp. 877–883. DOI: 10.2298/ABS1303877J
5. Vlasov V.A., Volokitin G.G., Skripnikova N.K., Volokitin O.G. Plazmennye tehnologii sozdanija i obrabotki stroitel’nyh materialov [Plasma technologies for creating and processing building materials]. Tomsk: NTL. 2018. 513 p.
6. Bruyako M.G., Grigorieva L.S., Grigorieva A.I. Plasma-modified sorbents based on zeolite-containing rocks of the Khotynetsk deposit. Stroitel’stvo: nauka i obrazovanie. 2017. Vol. 7. No. 4 (25), p. 3. (In Russian).
7. Bruyako M., Grigoreva L. Effective sorbents based on plasma-modified aluminosilicate minerals. IOP Conference Series: Materials Science and Engineering. 2018. Vol. 365. 032027. https://doi.org/10.1088/1757-899X/365/3/032027
8. Alanis A., Valdes J.H., Guadalupe N.-V.M., Lopez R., Mendoza R., Mathew A.P., de Leon R.D., Valencia L. Plasma surface-modification of cellulose nanocrystals: a green alternative towards mechanical reinforcement of ABS. RSC Advances. 2019. No. 9, pp. 17417–17424. https://doi.org/10.1039/C9RA02451D
9. Andreev A.I., Selyanina S.B., Bogdanovich N.I. Sorption properties of deciduous and coniferous sulfate lignins. Himija rastitel’nogo syr’ja. 2011. Vol. 2, pp. 33–39.
10. Linderoth O., Johansson P., Wadsö L. Development of pore structure, moisture sorption and transport properties in fly ash blended cement-based materials. Construction and Building Materials. 2020. Vol. 261, pp. 58–56. https://doi.org/10.1016/j.conbuildmat.2020.120007
11. Magnus Sören Åhs Sorption scanning curves for hardened cementitious materials. Construction and Building Materials. 2008. Vol. 22, pp. 12–34. https://doi.org/10.1016/j.conbuildmat.2007.08.009
12. Teptereva G.A., Pakhomov S.I., Chetvertneva I.A., Karimov E.Kh. Renewable natural raw materials, structure, properties, application prospects. Izvestija vysshih uchebnyh zavedenij. Himija i himicheskaja tehnologija. 2021. Vol. 64 (9), pp. 4–121. DOI: 10.6060/ivkkt.20216409/6465
13. Zhang Y., Yu Y., Lu Y., Yu W., Wang S. Effects of heat treatment on surface physicochemical properties and sorption behavior of bamboo (Phyllostachys edulis). Construction and Building Materials. 2021. Vol. 282, pp. 12–34. https://doi.org/10.1016/j.conbuildmat.2021.122683
14. Vares M.-L., Ruus A., Nutt N., Kubjas A., Raamets J. Determination of paper plaster hygrothermal performance: Influence of different types of paper on sorption and moisture buffering. Journal of Building Engineering. 2021. Vol. 33, pp. 36–51 https://doi.org/10.1016/j.jobe.2020.101830
15. Khubatkhuzin A.A., Abdullin I.Sh., Shaekhov M.F., Bashkirtsev A.A. Plasma-chemical processing of materials. Vestnik Kazanskogo tekhnologicheskogo universiteta. 2012. Vol. 15, pp. 88–92.

For citation: Bruyako M.G., Bessonov I.V., Gorbunova E.A., Govryakov I.S. Sorption properties of modified Sosnovsky's hogweed. Stroitel’nye Materialy [Construction Materials]. 2021. No. 10, pp. 54–59. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2021-796-10-54-59


Print   Email