knauf b1


Durability and Reliability of Space Rod Structures Made of Polymers with Nodes Made of Composite Materials at Cyclic Changes in Heat and Humidity Parameters of Operation

Number of journal: 6-2021
Autors:

Fedosov S.V.,
Malbiev S.A.

DOI: https://doi.org/10.31659/0585-430X-2021-792-6-62-66
УДК: 677.494.743.22

 

AbstractAbout AuthorsReferences
Structural tubular elements made of non-plasticized polyvinyl chloride (PVC), one of the cheap thermoplastic materials characterized by high resistance to various chemically aggressive environments, are considered. The developed plastic cross-rod spatial structure made of PVC pipes is recommended for closed ground structures (hot houses, greenhouses, glass houses), warehouses of mineral fertilizers and farm products, covered parking lots for cars and agricultural machines, gas stations and car service stations, offshore stationary deep-water platforms, etc. Low and high temperatures significantly affect changes in the mechanical characteristics of structural plastics: tensile strength/compression, bending, loss of stability, which ultimately reduces the operational reliability and durability of the cross-rod spatial structure. Therefore, in the calculations of the stress-strain state, it is necessary to take into account the non-stationary heat transfer in the load-bearing space rod systems. The derivation of differential heat transfer equations based on the application of the law of conservation of energy to an infinitesimal element of the environment is considered, taking into account the heat flows through the surface of this element, as well as the release or absorption of thermal energy in the volume of this element. Taking into account the influence of the process temperature on PVC tubular elements in time inside the premises during the operation of the cross-rod spatial structure will make it possible to increase the reliability and durability for predicting their technical condition, for example, by forcibly changing the temperature regime with the help of special devices.
S.V. FEDOSOV1, Doctor of Sciences (Engineering), Academician of RAASN (This email address is being protected from spambots. You need JavaScript enabled to view it.);
S.A. MALBIEV2, Candidate of Sciences (Engineering), Leading researcher

1 National Research Moscow State University of Civil Engineering (26, Yaroslavskoe Highway, Moscow, 129337, Russian Federation)
2 “Engineer-Story” NPP LLC (office 103, 15a, Krasnykh Zor’ Street, Ivanovo, 153003, Russian Federation)

1. Malbiev S.A. Konstruktsii iz dereva i plastmass. Perekrestno-sterzhnevyye prostranstvennyye konstruktsii pokrytiy zdaniy [Wood and plastic constructions. Cross-bar spatial structures of buildings’ roofs]. Moscow: ASV. 2017. 336 p.
2. Malbiev S.A., Gorshkov V.K., Talking P.B. Polimery v stroitel’stve [Polymers in construction]. Moscow: Vysshaya shkola. 2008. 456 p.
3. Zaikov G.E. Goreniye, destruktsiya i stabilizatsiya polimerov [Combustion, destruction and stabilization of polymers]. Saint Petersburg: Nauchnyye osnovy i tekhnologii. 2008. 422 p.
4. Polimernyye kompozitsionnyye materialy: struktura, svoystva, tekhnologiya [Polymer composite materials: structure, properties, technology / Ed. A.A. Berlin]. Saint Petersburg: “Professiya”. 2014. 592 p.
5. Kryzhanovsky V.K. Tekhnicheskiye svoystva polimernykh materialov [Technical properties of polymeric materials / Under total. ed. Kryzhanovsky V.C. 2nd ed.] Saint Petersburg: “Professiya”. 2005. 248 p.
6. Mikhailin Yu.A. Konstruktsionnyye polimernyye kompozitsionnyye materialy [Structural polymer composite materials. 2nd ed.] Saint Petersburg: Nauchnyye osnovy i tekhnologii. 2010. 822 p.
7. Kerber M.L., Gorbatkina Yu.A., Kuperman A.M. Polimernyye kompozitsionnyye materialy. Struktura. Svoystva. Tekhnologii. [Polymer composite materials. Structure. Properties. Technologies. 2nd ed.] Saint Petersburg: “Professiya”. 2008. 560 p.
8. Bazhenov S.L., Berlin A.A., Kulkov A.A., Oshmyan V.K. Polimernyye kompozitsionnyye materialy. Prochnost’ i tekhnologiya [Polymer composite materials. Strength and technology]. Moscow: Intellekt. 2010, 347 p.
9. Bobovich B.B. Polimernyye konstruktsionnyye materialy (struktura, svoystva, primeneniye) [Polymeric construction materials (structure, properties, application)]. Moscow: FORUM: Infra-M. 2017. 400 p.
10. Fedosov S.V., Malbiev S.A. Structural structures made of polymeric materials for coating buildings and structures with a chemically aggressive environment. Part 1. Strength and deformability in a stationary thermal field. Vestnik grazhdanskikh inzhenerov. 2018. No. 3, pp. 54–61. (In Russian).
11. Lykov A.V. Teoriya teploprovodnosti [Heat conduction theory]. Moscow: Vysshaya shkola. 1967. 600 p.
12. Fedosov S.V. Teplomassoperenos v tekhnologicheskikh protsessakh stroitel’noy industrii: monografiya [Heat and mass transfer in technological processes of the construction industry: monograph]. Ivanovo: IPK “PressSto”. 2010. 364 p.
13. Fedosov S.V., Malbiev S.A. Structural structures made of polymeric materials for coating buildings and structures with a chemically aggressive environment. Part 2. Non-stationary heat transfer. Vestnik grazhdanskikh inzhenerov. 2018. No. 6, pp. 25–29. (In Russian).
14. Fedosov S.V., Aloyan R.M., Ibragimov A.M., Gnedina L.Yu., Aksakovskaya L.N. Promerzaniye vlazhnykh gruntov, osnovaniy i fundamentov [Freezing of wet soils, bases and foundations]. Moscow: ASV. 2005. 277 p.

For citation: Fedosov S.V., Malbiev S.A. Durability and reliability of space rod structures made of polymers with nodes made of composite materials at cyclic changes in heat and humidity parameters of operation. Stroitel’nye Materialy [Construction Materials]. 2021. No. 6, pp. 62–66. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2021-792-6-62-66


Print   Email