Design of the Blast Furnace Wall Structure Made of Efficient Materials. Part 4. Calculation Examples

Number of journal: 11-2020
Autors:

Ibragimov A.M.,
Gnedina L.Yu.

DOI: https://doi.org/10.31659/0585-430X-2020-786-11-30-34
УДК: 669.162.212

 

AbstractAbout AuthorsReferences
This work is part of a series of articles under the general title “The structural design of the blast furnace wall from efficient materials” [1–3]. In part 1, “Problem statement and calculation prerequisites”, typical multilayer enclosing structures of a blast furnace are considered. The layers that make up these structures are described. The main attention is paid to the lining layer. The process of iron smelting and temperature conditions in the characteristic layers of the internal environment of the furnace is briefly described. Based on the theory of A.V. Lykov, the initial equations describing the interrelated transfer of heat and mass in a solid are analyzed in relation to the task – an adequate description of the processes for the purpose of further rational design of the multilayer enclosing structure of the blast furnace. A priori the enclosing structure is considered from a mathematical point of view as the unlimited plate. In part 2, “Solving boundary value problems of heat transfer”, boundary value problems of heat transfer in individual layers of a structure with different boundary conditions are considered, their solutions, which are basic when developing a mathematical model of a non-stationary heat transfer process in a multi-layer enclosing structure, are given. Part 3 presents a mathematical model of the heat transfer process in the enclosing structure and an algorithm for its implementation. The proposed mathematical model makes it possible to solve a large number of problems. Part 4 presents a number of examples of calculating the heat transfer process in a multilayer blast furnace enclosing structure. The results obtained correlate with the results obtained by other authors, this makes it possible to conclude that the new mathematical model is suitable for solving the problem of rational design of the enclosing structure, as well as to simulate situations that occur at any time interval of operation of the blast furnace enclosure.
A.M. IBRAGIMOV, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
L.Yu. GNEDINA, Candidate of Sciences (Engineering)

National Research Moscow State University of Civil Engineering (26, Yaroslavskoye Highway, Moscow, 129337, Russian Federation)

1. Ibragimov A.M., Lipenina A.V. Design of the blast furnace wall structure made of efficient materials. Part 1. Statement of a problem and calculation prerequisites. Stroitel’nye Materialy [Construction Materials]. 2018. No. 3, pp. 70–74. DOI: http://10.31659/0585-430X-2018-757-3-70-74 (In Russian).
2. Ibragimov A.M., Lipenina A.V., Gnedina L.Yu. Design of the blast furnace wall structure made of efficient mate-rials. Part 2. Solution of boundary problems of heat transfer. Stroitel’nye Materialy [Construction Mate-rials]. 2018. No. 5, pp. 73–76. DOI: https://doi.org/doi.org/10.31659/0585-430X-2018-759-5-73-76 (In Russian).
3. Fedosov S.V., Ibragimov A.M., Gnedina L.Yu. Design of the blast furnace wall structure made of efficient materials. Part 3. Mathematical model of heat transfer process. Stroitel’nye Materialy [Construction Materials]. 2018. No. 12, pp. 71–75. DOI: https://doi.org/10.31659/0585-430X-2018-766-12-71-75 (In Russian).
4. Fedosov S.V. Analytical description of heat and moisture transport in the process of drying dispersed materials in the presence of thermal diffusion and internal evaporation of moisture. Zhurnal prikladnoy khimii. 1986. Vol. 59. No. 3, pp. 2033–2038. (In Russian).
5. Fedosov S.V., Kiselnikov V.N. Heat transfer in a spherical particle with convective drying in a suspended state. Izvestiya vuzov. Khimiya i khimicheskaya tekhnologiya. 1985. Vol. 28. No. 2, pp. 14–15. (In Russian).
6. Fedosov S.V., Zaitsev V.A., Shmelev A.L. Calculation of temperature fields in a cylindrical reactor with an unevenly distributed heat source. The state and prospects for the development of electrical technology. Abstracts of reports of the all-Union scientific and technical conference. Ivanovo. 1987, p. 28. (In Russian).
7. Fedosov S.V., Kisel’nikov V.N., Shertayev T.U. Primeneniye metodov teorii teploprovodnosti dlya modelirovaniya protsessov konvektivnoy sushki [Application of the methods of the theory of heat conductivity for modeling the processes of convective drying]. Alma-Ata: Gylym. 1992. 168 p.
8. Fedosov S.V., Gnedina L.Yu. Non-stationary heat transfer in a multilayered enclosing structure. Problems of construction thermophysics of microclimate and energy-saving systems in buildings: Collection of reports of IV scientific-practical conference. Moscow. April 27–29, 1999, pp. 343–348. (In Russian).
9. Chizilskiy E. Ventilated structures of external walls. Zhilishchnoe Stroitel’stvo [Housing Construction]. 1996. No. 10, pp. 25–27. (In Russian).
10. Shmelev A.L. Fedosov S.V., Zaytsev V.A., Sokol’s-kiy A.I., Kisel’nikov V.N. Modelirovanie nestatsionarnogo teploperenosa v reaktore gidroliza tsiansoderzhashchikh polimerov [Modeling of non-stationary heat transfer in the reactor of hydrolysis of cyanide-containing polymers]. Ivanovo Chemical Technology Institute. 1988. Dep. In the NIITEKhIM. N1076–XII88.
11. Shmelev A.L. A continuous method for producing watersoluble polymers based on polyacrylonitrile with a highcontent of the basic substance. Cand. Diss. (Engineering). Ivanovo. 1998. (In Russian).
12. Lykov A.V., Mikhaylov Yu.A. Teoriya perenosa energii i veshchestva [Theory of energy and matter transfer]. Minsk: AN BSSR Publishing. 1959. 330 p.
13. Fedosov S.V., Ibragimov A.M., Gnedina L.Yu., Gushchin A.V. Mathematical model of non-stationary heat transfer in a multilayered enclosing structure. Reports of the XII Russian-Polish seminar “Theoretical Foundations of Construction”. Warsaw: 2003, pp. 253–261. (In Russian).
14. Bol’shakova N.V. Energy and resource saving in hightemperature furnaces with a false casing. Izvestiya MGTU «MAMI». 2013. No. 3 (17). Vol. 2, pp. 79–85. (In Russian).
15. Chudnovsky A.F. Teplofizicheskiye kharakteristiki dispersnykh materialov. [Thermophysical characteristics of dispersed materials]. Moscow: Fizmatgiz. 1962. 456 p.
16. Fedosov S.V., Ibragimov A.M., Gnedina L.Yu., Ignatiev S.A. Calculation of the thickness of the heat-insulating (middle) layer of three-layer wall panels (wall 2). Certificate of industry registration of development No. 4977. State Coordinating Center for Information Technologies. Industry fund of algorithms and programs. Moscow. 2005. (In Russian).

For citation: Ibragimov A.M., Gnedina L.Yu. Design of the blast furnace wall structure made of efficient materials. Part 4. Calculation examples. Stroitel’nye Materialy [Construction Materials]. 2020. No. 11, pp. 30–34. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2020-786-11-30-34


Print   Email