AbstractAbout AuthorsReferences
The article is devoted to prospects of the transition to the ecological regulation in the field of environment in Russia. Features and results of the process of preparation of the information-technical reference guide of the best accessible technologies (BAT) «Manufacture of Ceramic Products» are described; its contents are considered. Examples of BAT for production of ceramic products applicable in the industry in general, and values of technological parameters set for the production of bricks are presented. A suggestion to revise the criteria of attributing the enterprises for ceramic products manufacture to the objects of the first category is made. Recommendations on the improvement and actualization of the reference guide and conduction of pilot projects at Russian enterprises are proposed.
T.V. GUSEVA1 , Doctor of Sciences (Engineering),
A.I. ZAKHAROV1 , Candidate of Sciences (Engineering),
Ya.P. MOLCHANOVA1 , Candidate of Sciences (Engineering),
M.A. VARTANYAN1 , Candidate of Sciences (Engineering);
A.A. AKBEROV2 , Candidate of Sciences (Engineering)
A.I. ZAKHAROV1 , Candidate of Sciences (Engineering),
Ya.P. MOLCHANOVA1 , Candidate of Sciences (Engineering),
M.A. VARTANYAN1 , Candidate of Sciences (Engineering);
A.A. AKBEROV2 , Candidate of Sciences (Engineering)
1 Dmitry Mendeleev University of Chemical Technology of Russia (9, Miusskaya Sq., 125047 Moscow, Russian Federation)
2 «LSR Stenovye-M» (12, Aviamotornaya Street, 111024, Moscow, Russian Federation)
1. BREEAM International New Construction (NC) Scheme. URL: http://www.breeam.org/page.jsp?id=293
2. LEED Reference Guide for Building Design and Construction. LEED version: v4. 2013. URL: http:// www.usgbc.org/resources/leed-reference-guidebuildingdesign-and-construction.
3. Tsitsin K.G. Energy-efficient technology – the future of housing. Effektivnoe antikrizisnoe upravlenie. 2013. No. 2 (77), pp. 50–51. (In Russian).
4. Remizov A.N. On Stimulation of environmentally sustainable architecture and building. [Housing Construction]. 2013. No. 1, pp. 41–43. (In Russian).
5. GOST R 54964-2012 Conformity assessment. Environmental requirements for real estate. Federal Agency on Technical Regulating and Metrology. 36 p. (In Russian).
6. Averochkin E.M., Molchanova Ya.P., Guseva T.V., Vartanyan M.A. National standards for best available techniques as a tool for environmental regulation of enterprises, producing ceramic products. Khimicheskaya promyshlennost’ segodnya. 2013. No. 9, pp. 34–42. (In Russian).
7. Guseva T.V., Begak M.V., Molchanova Ya.P., Averochkin E.M., Vartanyan M.A. Prospects for the introduction of best available technologies and transition to integrated environmental permits in the production of glass and ceramics. Steklo i keramika. 2014. No. 7, pp. 26–36. (In Russian).
8. Skobelev D.O., Mezentseva O.V. NTD - an element of control and to prevent negative impacts on the environment. Kontrol’ kachestva produktsii. 2014. No. 6, pp. 7–12. (In Russian).
9. Guseva T.V., Molchanova Ya.P., Mironov A.V., Malkov A.V. Best available techniques: a new environmental dimension of quality in the building materials industry. Kompetentnost’. 2015. No. 8, pp. 48.
10. Federal Law of July 21, 2014 № 219-FZ “On Amendments to the Federal Law” On Environmental Protection “and Certain Legislative Acts of the Russian Federation”. Rossiiskaya gazeta – Federal’nyi vypusk. 2014. No. 6438 (166). (In Russian).
11. RF Government Resolution of September 28, 2015 № 1029 “On approval of the criteria for classifying objects that have a negative impact on the environment, to the objects I, II, III and IV categories.” http://government. ru/media/files/oHAMAREx1e9uyphc0U8Vq5ikOoyMOrAo.pdf.
12. The Handbook of Environmental Voluntary Agreements. Design, Implementation and Evaluation Issues. Ed. Croci Edoardo. Netherlands: Springer. 381 p.
13. Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control). Official Journal of the European Union. 17.12.2010, pp. L334/17-L334/119.
14. Begak M.V., Boravskaya T.V., Ruut Yu., Molchanova Ya.P., Zakharov A.I., Sivkov S.P. Nailuchshie dostupnye tekhnologii i kompleksnye ekologicheskie razresheniya: perspektivy primeneniya v Rossii [Best available techniques and integrated environmental permits: prospects of application in Russia] Moscow: YurInfoRPress. 2010. 220 p.
15. Information and technical reference “Production of ceramic products” ITS 4M .: Bureau of BAT. 2015. http:// burondt.ru/informacziya/dokumentyi.
16. GOST R 55646-2013. Resource. Manufacture of bricks and ceramic stones. Guidance on the application of best available energy efficiency and environmental impact of technology. Moscow: Standartinform. 2014. (In Russian).
17. Reference Document on Best Available Techniques in Ceramic Manufacturing Industry. The European IPPC Bureau, 2007. URL: http://eippcb.jrc.ec.europa.eu/reference/BREF/cer_bref_0807.pdf.
18. Guseva T.V., Begak M.V., Molchanova Ya.P. Principles of creation and perspectives of information and technical manuals BAT. Kompetentnost’. 2015. No. 5/126, pp. 8–17.
2. LEED Reference Guide for Building Design and Construction. LEED version: v4. 2013. URL: http:// www.usgbc.org/resources/leed-reference-guidebuildingdesign-and-construction.
3. Tsitsin K.G. Energy-efficient technology – the future of housing. Effektivnoe antikrizisnoe upravlenie. 2013. No. 2 (77), pp. 50–51. (In Russian).
4. Remizov A.N. On Stimulation of environmentally sustainable architecture and building. [Housing Construction]. 2013. No. 1, pp. 41–43. (In Russian).
5. GOST R 54964-2012 Conformity assessment. Environmental requirements for real estate. Federal Agency on Technical Regulating and Metrology. 36 p. (In Russian).
6. Averochkin E.M., Molchanova Ya.P., Guseva T.V., Vartanyan M.A. National standards for best available techniques as a tool for environmental regulation of enterprises, producing ceramic products. Khimicheskaya promyshlennost’ segodnya. 2013. No. 9, pp. 34–42. (In Russian).
7. Guseva T.V., Begak M.V., Molchanova Ya.P., Averochkin E.M., Vartanyan M.A. Prospects for the introduction of best available technologies and transition to integrated environmental permits in the production of glass and ceramics. Steklo i keramika. 2014. No. 7, pp. 26–36. (In Russian).
8. Skobelev D.O., Mezentseva O.V. NTD - an element of control and to prevent negative impacts on the environment. Kontrol’ kachestva produktsii. 2014. No. 6, pp. 7–12. (In Russian).
9. Guseva T.V., Molchanova Ya.P., Mironov A.V., Malkov A.V. Best available techniques: a new environmental dimension of quality in the building materials industry. Kompetentnost’. 2015. No. 8, pp. 48.
10. Federal Law of July 21, 2014 № 219-FZ “On Amendments to the Federal Law” On Environmental Protection “and Certain Legislative Acts of the Russian Federation”. Rossiiskaya gazeta – Federal’nyi vypusk. 2014. No. 6438 (166). (In Russian).
11. RF Government Resolution of September 28, 2015 № 1029 “On approval of the criteria for classifying objects that have a negative impact on the environment, to the objects I, II, III and IV categories.” http://government. ru/media/files/oHAMAREx1e9uyphc0U8Vq5ikOoyMOrAo.pdf.
12. The Handbook of Environmental Voluntary Agreements. Design, Implementation and Evaluation Issues. Ed. Croci Edoardo. Netherlands: Springer. 381 p.
13. Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control). Official Journal of the European Union. 17.12.2010, pp. L334/17-L334/119.
14. Begak M.V., Boravskaya T.V., Ruut Yu., Molchanova Ya.P., Zakharov A.I., Sivkov S.P. Nailuchshie dostupnye tekhnologii i kompleksnye ekologicheskie razresheniya: perspektivy primeneniya v Rossii [Best available techniques and integrated environmental permits: prospects of application in Russia] Moscow: YurInfoRPress. 2010. 220 p.
15. Information and technical reference “Production of ceramic products” ITS 4M .: Bureau of BAT. 2015. http:// burondt.ru/informacziya/dokumentyi.
16. GOST R 55646-2013. Resource. Manufacture of bricks and ceramic stones. Guidance on the application of best available energy efficiency and environmental impact of technology. Moscow: Standartinform. 2014. (In Russian).
17. Reference Document on Best Available Techniques in Ceramic Manufacturing Industry. The European IPPC Bureau, 2007. URL: http://eippcb.jrc.ec.europa.eu/reference/BREF/cer_bref_0807.pdf.
18. Guseva T.V., Begak M.V., Molchanova Ya.P. Principles of creation and perspectives of information and technical manuals BAT. Kompetentnost’. 2015. No. 5/126, pp. 8–17.
For citation: