Ways of Cutting Barked Logs for Creation of Glued Designs with Changing Geometrical Characteristics of Section on Length

Number of journal: 11-2015
Autors:

Zaytseva K.V.
Tikhomirov L.A.
Titunin A.A.
Ibragimov A.M.

DOI: https://doi.org/10.31659/0585-430X-2015-731-11-62-64
УДК: 674.09

  

AbstractAbout AuthorsReferences
The rounded logs are used for creation of glued timber designs that causes big percent of waste (or a small exit). The use of barked of logs with preservation of a taper is a feature of approach to cutting of round forest products in this article. It allows: 1. to minimize waste; 2. to create glued designs of variable section on length with increased geometrical characteristics (the section resistance moment) and increased bearing capacity in relation to the initial round section.
K.V. ZAYTSEVA, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
L.A. TIKHOMIROV, Candidate of Sciences (Engineering)
A.A. TITUNIN, Doctor of Sciences (Engineering)
A.M. IBRAGIMOV, Doctor of Sciences (Engineering)

Kostroma State Technological University (17 Dzerzhinskogo Street, 156005, Kostroma, Russian Federation)

1. Ershov S.V. Delimitation of dimensional ranges of the sawn raw materials at effective operation of the sawing equipment. Izvestiya vysshikh uchebnykh zavedeniy. Lesnoy zhurnal. 2013. No. 4, pp. 72–79. (In Russian).
2. Yanushkevich A.A., Larchenko A.V., Chernyavskiy E.A. Individual cutting of logs on radial timber for glued bars. Aktual’nye problemy lesnogo kompleksa. 2012. No. 34, pp. 104–106. (In Russian).
3. Patent RF 2415749. Sposob polucheniya kleenykh pilomaterialov iz breven (varianty) [Way of receiving glued timber from logs (options)] / Chervinskiy V.A., Boldyrev V.S., Shchepkin V.B., Kozhukhova I.G. Declared 09.06.2009. Published 10.04.2011. (In Russian).
4. Patent RF 2185280. Sposob pererabotki breven [Way of processing of logs] / Isaev S.P. Declared 09.06.2001. Published 20.07.2002. (In Russian).
5. Patent RF 2438861. Sposob polucheniya kleenykh pilomaterialov iz bokovykh dosok brevna (varianty) [Way of receiving glued timber from side boards of a log (options)] / Chervinskiy V.A., Boldyrev V.S., Shchepkin V.B., Kozhukhova I.G.; Declared 05.04.2010. Published 10.01.2012. (In Russian).
6. Volynskiy V.N., Plastinin S.N. Pervichnaya obrabotka pilomaterialov na lesopil’nykh predpriyatiyakh [Preprocessing of timber at the sawing enterprises]. Saint-Petersburg: «Lan’». 2012. 264 p.

For citation: Zaytseva K.V., Tikhomirov L.A., Titunin A.A., Ibragimov A.M. Ways of Cutting Barked Logs for Creation of Glued Designs with Changing Geometrical Characteristics of Section on Length. Stroitel’nye Materialy [Construction Materials]. 2015. No. 11, pp. 62-64. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2015-731-11-62-64


Print   Email