AbstractAbout AuthorsReferences
The analysis and results of the study of conditions of silicate adobe brick steam curing are presented. Expansion of the range of silicate brick and manufacture of color brick in particular, requires a new approach to the technology. The stage of steam supply into the autoclave or the new separate stage of brick steam curing at atmospheric pressure is considered. Steam characteristic at the stage of 0–0,1 MPa is given. Variants of the product heating in the autoclave are analyzed in the form of graphs.
G.V. KUZNETSOVA, Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.)
Kazan State University of Architecture and Engineering (1 Zelenaya Street, 420043, Kazan, Russian Federation)
1. Khavkin L.M. Tekhnologiya silikatnogo kirpicha [Technology of sand-lime brick]. Moscow: Ekolit. 2011. 384 p.
2. Sazhnev. N.P, Sazhnev N.N., Sazhneva N.N., Golubev N.M. Proizvodstvo yacheistobetonnykh izdelii. Teoriya i praktika [Production of cellular concrete products. Theory and practice]. Minsk: Strinko. 2010. 464 p.
3. Mukhina T.G. Proizvodstvo silikatnogo kirpicha [Production of lime-sand brick]. Moscow: Vysshaya shkola. 1967. 179 p.
4. Vakhnin M.P., Anishchenko A.A. Proizvodstvo silikatnogo kirpicha [Production of lime-sand brick] Moscow: Vysshaya shkola. 1989. 200 p.
5. Kuznetsova G.V., Sannikova V.I. Influence of Hydrothermal Treatment on Quality of Colored Silicate Brick. Stroitel’nye Materialy [Construction Materials]. 2010. No. 9, pp. 36–39. (In Russian).
6. Rudchenko D.G. Autoclave treatment of products from cellular concrete. Ves’Beton: elektronnyi zhurnal (date of access 20.08.2015). (In Russian).
7. Bazhenov Yu.M. Tekhnologiya betona. Moscow: ASV. 2002. 500 p.
2. Sazhnev. N.P, Sazhnev N.N., Sazhneva N.N., Golubev N.M. Proizvodstvo yacheistobetonnykh izdelii. Teoriya i praktika [Production of cellular concrete products. Theory and practice]. Minsk: Strinko. 2010. 464 p.
3. Mukhina T.G. Proizvodstvo silikatnogo kirpicha [Production of lime-sand brick]. Moscow: Vysshaya shkola. 1967. 179 p.
4. Vakhnin M.P., Anishchenko A.A. Proizvodstvo silikatnogo kirpicha [Production of lime-sand brick] Moscow: Vysshaya shkola. 1989. 200 p.
5. Kuznetsova G.V., Sannikova V.I. Influence of Hydrothermal Treatment on Quality of Colored Silicate Brick. Stroitel’nye Materialy [Construction Materials]. 2010. No. 9, pp. 36–39. (In Russian).
6. Rudchenko D.G. Autoclave treatment of products from cellular concrete. Ves’Beton: elektronnyi zhurnal (date of access 20.08.2015). (In Russian).
7. Bazhenov Yu.M. Tekhnologiya betona. Moscow: ASV. 2002. 500 p.
For citation: Kuznetsova G.V. Steam Curing of Silicate Brick in Autoclave. Stroitel’nye Materialy [Construction Materials]. 2015. No. 10, pp. 10-14. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2015-730-10-10-14