Improvement in Manufacturing Technology of Basalt Fiber Concrete with Increased Uniformity

Number of journal: 10-2015
Autors:

Kudyakov A.I.
Plevkov V.S.
Kudyakov K.L.
Nevsky A.V.
Ushakova A.S.

DOI: https://doi.org/10.31659/0585-430X-2015-730-10-44-48
УДК: 666.974, 693.542.4, 693.554-486

 

AbstractAbout AuthorsReferences
Technological methods for preparing the basalt fiber concrete mix with increased uniformity are studied. It is established that 5% of basalt fibers of cement mass is an optimal content ensuring the uniform distribution of fibers in the concrete volume, the growth of compression strength of concrete by 51.2% and tensile strength by 28.8%. In the course of microscopic study of basalt fiber, new formations on the surface of basalt fibers are revealed; it shows the increase in adhesion of cement stone to fibers. The introduction of basalt fibers in the concrete mix significantly improves the uniformity of concrete quality indicators.
A.I. KUDYAKOV, Doctor of Sciences (Engineering)
V.S. PLEVKOV, Doctor of Sciences (Engineering)
K.L. KUDYAKOV, Engineer
A.V. NEVSKY, Engineer
A.S. USHAKOVA, Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.)

Tomsk State University of Architecture and Building (2, Solyanaya Street, 634003, Tomsk, Russian Federation)

1. Kudyakov A.I., Ushakova A.S., Kudyakov K.L., Dubasarov D.I., Efremova V.A. Trends in technology development of high strength heavy cement concrete. Building of energy-efficient full assembly economy-class housing: Collection of scientific papers. Tomsk: TSUAB. 2014, pp. 125–131. (In Russian).
2. Kudyakov A.I., Ushakova A.S., Kudyakov K.L., Nevskii A.V. Influence of plasticizers and microarming additives on strength and rheological characteristics of the concrete. Resource-saving technologies and efficient using of local materials in building. International collection of scientific papers. Novosibirsk: NGAU. 2013, pp. 10–14. (In Russian).
3. Vasilovskaya N.G., Endzhievskaya I.G., Kalugin I.G. Cement compositions disperse-reinforced by the basalt fiber. Vestnik TGASU. 2011. № 3, pp. 153–158. (In Russian).
4. Voilokov I.A., Kanaev S.F. Bazaltofibrobeton. Historical excursus. Inzhenerno-stroitel’nyi zhurnal. 2009. № 4. pp. 26–31. (In Russian).
5. Rabinovich F.N. Kompozity na osnove dispersno-armirovannykh betonov. Voprosy teorii i proektirovaniya, tekhnologiya, konstruktsii [Composites based on concrete with dispersed reinforcement. Issues of theory and design, technology, design]. Moscow: ASV. 2004. 560 p. (In Russian).
6. Weimin L., Jinyu X. Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading. Material Science and Engineering: A. 2010. Vol. 505. pp. 178–186. (In English).
7. Abdulhadi M. A comparative study of basalt and polypropylene fibers reinforced concrete on compressive and tensile behavior. International Journal of Engineering Trends and Technology (IJETT). 2014. Vol. 9. № 6. pp. 295–300. (In English).
8. Elshekh A.E.A., Shafiq N., Nuruddin M.F., Fathi A. Evaluation the effectiveness of chopped basalt fiber on the properties of high strength concrete. Journal of Applied Sciences. 2014. Vol. 14. № 10. pp. 1073–1077. doi: 10.3923/jas.2014.1073.1077. (In English).

For citation: Kudyakov A.I., Plevkov V.S., Kudyakov K.L., Nevsky A.V., Ushakova A.S. Improvement in Manufacturing Technology of Basalt Fiber Concrete with Increased Uniformity. Stroitel’nye Materialy [Construction Materials]. 2015. No. 10, pp. 44-48. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2015-730-10-44-48


Print   Email