AbstractAbout AuthorsReferences
The conducted research and analysis of foreign experience showed that the most effective method of combating the adhesion of rocks to working surfaces is their lining with anti-adhesive and easily replaceable polymer plates. Thus, at the pelletizing plant of pelletizing factory of JSC Mikhailovsky GOK, as a result of the conducted research, the classification of polymer anti-stick lining plates (PASLP) was adopted, namely: PASLP HP (high pressure) SD (standard design); PASLP LP (low pressure) SD (standard design); PPFP IWR (increased wear resistance and impact resistance); PPFP HWR (high wear resistance and impact resistance). In the last 35 years, the following sheet materials have been recommended on the Russian market for various purposes: LDPE, HDPE, PP, PPFP-ASTIKI, PPL-EI, PPL-UI(CBM), Supralen1000, Tivar1000, VMPE 500, SVMPE1000, SVMPE9000, PE500, PE1000, PE9000, lnkulen 100, 500, 1000, 9000. For the correct selection of such materials for specific mining and geological and mining-technical conditions of operation of various process equipment, methods tested in the open press are recommended, allowing the selection of PASLP (sheets) depending on the strength of rocks according to the scale of prof. M.M. Protodyakonov and determining the optimal sheet thickness for various operating conditions of the equipment. Positive experience in combating the adhesion of finely ground iron ore concentrate and raw materials to the working surfaces of the process equipment of the pelletizing plant of JSC Mikhailovsky GOK named after A.V. Varichev is recommended for wide implementation at related enterprises of the Kursk Magnitka Anomaly, as well as at similar enterprises in other sectors of the mining and processing industry.
.G. KUZNETSOV, Expert (This email address is being protected from spambots. You need JavaScript enabled to view it.),
S.V. GRECHIN, Director (This email address is being protected from spambots. You need JavaScript enabled to view it.),
Yu.V. VOROBYEV, Manager (This email address is being protected from spambots. You need JavaScript enabled to view it.)
S.V. GRECHIN, Director (This email address is being protected from spambots. You need JavaScript enabled to view it.),
Yu.V. VOROBYEV, Manager (This email address is being protected from spambots. You need JavaScript enabled to view it.)
OOO PMTS “OM” (1A, Kommunalnaya Street, Kursk, 305010, Russian Federation)
1. Kuznetsov V.G., Petrov I.V., Kiselev N.N., Rubin S.M., Podolyan M.G. Reducing the adhesion of rocks to the working surfaces of mining and processing equipment. Gornyy Zhurnal. 1999. No. 2, pp. 60–64. (In Russian).
2. Kuznetsov V.G., Zhukov V.P., Mikhailov E.M., Syrtsov V.M., Rubin S.M. Polymer anti-stick lining plates. Stroitel’nye Materialy [Construction Materials]. 2000. No. 6, pp. 10–11. (In Russian). EDN: IAJNFT
3. Pazynich G.P., Kuchin A.N., Krivonos M.V., Kuznetsov V.G., Kuznetsov I.P. Application of polymer anti-stick plates for lining the walls of bunkers and handling units. Gornyy Zhurnal. 2003. No. 9, pp. 59–60. (In Russian). EDN: QAGCBJ
4. Kuznetsov V.G., Zatkovetskiy V.M., Kuznetsov I.P., Krivonos M.V., Tarasov S.N. Polymer anti-stick lining plates – an effective means of combating the adhesion of rocks to the working surfaces of excavator and technological equipment. Gornyy Zhurnal. 2006. No. 4, p. 56. (In Russian). EDN: HSWKYN
5. Kuznetsov V.G., Kuznetsov I.P., Borodin A.A., Ivannikov D.I., Zaostrovsky P.V., Anufriev D.A., Mokrousov N.S. Factory production of bunkers equipped with efficient means of struggle with adhering of materials – PPFP-ASTIKI. Stroitel’nye Materialy [Construction Materials]. 2013. No. 5, pp. 54–56. (In Russian). EDN: QBDWAH
6. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P., Kochetov E.V., Pazynich G.P., Vaschenko V.D., Rozhkov A.M. Efficient operation of process equipment at the pelletizing plant of OAO Mikhailovsky GOK when working with moistened raw materials. Gornyy Zhurnal. 2013. No. 12, pp. 71–73. (In Russian). EDN: RUCOXD
7. Kuznetsov V.G., Kuznetsov I.P., Puzakov P.V., Vashchenko D.V., Ovsyannikov Yu.N., Ganzhov V.A. Solving the problem of controlling the sticking of iron ore concentrate and raw materials on the working surfaces of the technological equipment of the pelletizing plant of JSC “Mikhailovsky Mining and Processing Plant named after. A.V. Varichev”. Stroitel’nye Materialy [Construction Materials]. 2022. No. 7, pp. 17–20. (In Russian) EDN: FXHQLT. https://doi.org/10.31659/0585-430X-2022-804-7-17-20
8. Kuznetsov V.G., Zatkovetskiy V.M., Kuznetsov I.P. Selection of polymer anti-stick lining plates depending on the strength of rocks. Stroitel’nye Materialy [Construction Materials]. 2005. No. 10, p. 86. (In Russian). EDN: HZFUKH
9. Kuznetsov V.G., Kuznetsov I.P. Determination of the thickness of a polymer anti-stick lining plate for various operating conditions of equipment. Stroitel’nye Materialy [Construction Materials]. 2007. No. 5, pp. 13–14. (In Russian). EDN: HZZIGX
2. Kuznetsov V.G., Zhukov V.P., Mikhailov E.M., Syrtsov V.M., Rubin S.M. Polymer anti-stick lining plates. Stroitel’nye Materialy [Construction Materials]. 2000. No. 6, pp. 10–11. (In Russian). EDN: IAJNFT
3. Pazynich G.P., Kuchin A.N., Krivonos M.V., Kuznetsov V.G., Kuznetsov I.P. Application of polymer anti-stick plates for lining the walls of bunkers and handling units. Gornyy Zhurnal. 2003. No. 9, pp. 59–60. (In Russian). EDN: QAGCBJ
4. Kuznetsov V.G., Zatkovetskiy V.M., Kuznetsov I.P., Krivonos M.V., Tarasov S.N. Polymer anti-stick lining plates – an effective means of combating the adhesion of rocks to the working surfaces of excavator and technological equipment. Gornyy Zhurnal. 2006. No. 4, p. 56. (In Russian). EDN: HSWKYN
5. Kuznetsov V.G., Kuznetsov I.P., Borodin A.A., Ivannikov D.I., Zaostrovsky P.V., Anufriev D.A., Mokrousov N.S. Factory production of bunkers equipped with efficient means of struggle with adhering of materials – PPFP-ASTIKI. Stroitel’nye Materialy [Construction Materials]. 2013. No. 5, pp. 54–56. (In Russian). EDN: QBDWAH
6. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P., Kochetov E.V., Pazynich G.P., Vaschenko V.D., Rozhkov A.M. Efficient operation of process equipment at the pelletizing plant of OAO Mikhailovsky GOK when working with moistened raw materials. Gornyy Zhurnal. 2013. No. 12, pp. 71–73. (In Russian). EDN: RUCOXD
7. Kuznetsov V.G., Kuznetsov I.P., Puzakov P.V., Vashchenko D.V., Ovsyannikov Yu.N., Ganzhov V.A. Solving the problem of controlling the sticking of iron ore concentrate and raw materials on the working surfaces of the technological equipment of the pelletizing plant of JSC “Mikhailovsky Mining and Processing Plant named after. A.V. Varichev”. Stroitel’nye Materialy [Construction Materials]. 2022. No. 7, pp. 17–20. (In Russian) EDN: FXHQLT. https://doi.org/10.31659/0585-430X-2022-804-7-17-20
8. Kuznetsov V.G., Zatkovetskiy V.M., Kuznetsov I.P. Selection of polymer anti-stick lining plates depending on the strength of rocks. Stroitel’nye Materialy [Construction Materials]. 2005. No. 10, p. 86. (In Russian). EDN: HZFUKH
9. Kuznetsov V.G., Kuznetsov I.P. Determination of the thickness of a polymer anti-stick lining plate for various operating conditions of equipment. Stroitel’nye Materialy [Construction Materials]. 2007. No. 5, pp. 13–14. (In Russian). EDN: HZZIGX
For citation: Kuznetsov V.G., Grechin S.V., Vorobyev Yu.V. Polymer anti-stick lining plates. Stroitel'nye Materialy [Construction Materials]. 2025. No. 1–2, pp. 85–87. (In Russian). https://doi.org/10.31659/0585-430X-2025-832-1-2-85-87