AbstractAbout AuthorsReferences
One of the advantages of foam polyethylene is the ability to form seamless insulation shells. Material is mechanically attached to the base, the sheets are locked and welded with hot air. The results of the survey of building structures: frame cottages and frameless storage facilities, in which the foam polyethylene performs the function of external or interior insulation, as well as the insulation system of floating floor, are presented. Full-scale inspection of the frame building showed that the humidity of pine balk is within the normative; the appearance of rot is not fixed. The expediency of insulation only by the outer sheet of the foam polyethylene of calculated thickness without filling the frame is justified, which in case of normative air exchange and compliance with the conditions of air conditioning will be sufficient to maintain the microclimate in the room Thermo-vision survey of the frameless storage, made of corrugated sheet, demonstrated the almost complete absence of cold bridges on the smooth surface of the insulation shell. It is noted that the introduction of modern technologies of thermal insulation (heat insulation) of food warehouses and vegetable stores not only solves the issue of their energy-efficient all-season use, but directly affects the efficiency of storage systems of fruits and vegetables in such facilities.
A.D. ZHUKOV1, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
K.A. TER-ZAKARYAN2, Managing Director
I.V. BESSONOV3, Candidate of Sciences (Engineering)
V.S. SEMENOV1, Candidate of Sciences (Engineering)
A.V. STAROSTIN3, Engineer
K.A. TER-ZAKARYAN2, Managing Director
I.V. BESSONOV3, Candidate of Sciences (Engineering)
V.S. SEMENOV1, Candidate of Sciences (Engineering)
A.V. STAROSTIN3, Engineer
1 Moscow State University of Civil Engineering (National Research University) (26, Yaroslavskoe Highway, Moscow, 129337, Russian Federation)
2 OOO «TEPOFOL» (34, Profsoyuznaya Street, Egor’evsk, Moscow Region, 140301, Russian Federation)
3 Scientific-Research Institute of Building Physics of the Russian Academy of Architecture and Construction Sciences (21, Lokomotivniy Driveway, Moscow,127238, Russian Federation)
1. Zhuk P.M., Zhukov A.D. Normative legal base of environmental assessment of building materials: prospects for improvement. Ekologiya i promyshlennost’ Rossii. 2018. No. 4, рр. 52–57. (In Russian).
2. Gimenez I., Faroog M.-K., El Mahi A., Kondrotas A., Assarar M. Experimental analysis of mechanical behaviour and damage development mechanisms of PVC foams in static tests. Materials Science (Med iagotyra). 2004. No. 10 (1), рр. 34–39.
3. Fedyuk R.S., Mochalov A.V., Simonov V.A. Trends in the development of norms for thermal protection of buildings in Russia. Vestnik inzhenernyi shkoly DVFU. 2012. No. 2 (11), pp. 39–44. (In Russian).
4. Umnyakova N.P., Tsygankov V.M., Kuzmin V.A. Experimental Heat Engineering Studies for Rational Design of Wall Structures with Reflecting Heat Insulation. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2018. No. 1–2, рр. 38–42. (In Russian).
5. Gnip I.Ya., Kershulis V.I., Vaitkus S.Y. Confidential intervals of the forecast of deformations of creep of polyfoam from polystyrene. Stroitel’nye Materialy [Construction Materials]. 2005. No. 3. рр. 47–49. (In Russian).
6. Gnip I.J., Keršulis V.J., Vaitkus S.J. Analytical description of the creep of expanded polystyrene under compressive loading. Mechanics of Composite materials. 2005. No. 41 (4), pp. 357–364.
7. Semenov V.S., Ter-Zakaryan K.A., Zhukov A.D., Sazonova Yu.V. Features of Realization of Insulation Systems under Conditions of the Far North. Stroitel’nye Materialy [Construction Materials]. 2018. No. 4, рр. 65–69. (In Russian).
8. Semenov V.S., Rozovskaya T.A., Gubsky A.Yu. Prospects of Using Recycled Polyester Fibers for Manufacturing Heat- and Sound Insulation Materials. Stroitel’nye Materialy [Construction Materials]. 2016. No. 6, рр. 21–24. (In Russian).
9. Patent RF 2645190. Zamkovaya tekhnologiya teploizolyatsionnogo materiala dlya besshovnoi svarki soedinitel’nykh zamkov [Castle technology of heat-insulating material for seamless welding of connecting locks]. Declared 26.09.2016. Published 16.02.2018. Bulletin No. 5. (In Russian)
10. Zhukov A.D., Ter-Zakaryan K.A., Tuchaev D.U., Petrovsky E.S. Energy-efficient warming of food stores and vegetable stores. Mezhdunarodnyi sel’skokhozyaistvennyi zhurnal. 2018. No. 1, pp. 65–67. (In Russian).
11. Wang Y., Huang Z., Heng L. Cost-effectiveness assessment of insulated exterior wall of residential buildings in cold climate. International Journal of Project Management. 2007. Vol. 25. Iss. 2, рp. 143–149. DOI: https://doi.org/10.1016/j.ijproman.2006.09.007.
2. Gimenez I., Faroog M.-K., El Mahi A., Kondrotas A., Assarar M. Experimental analysis of mechanical behaviour and damage development mechanisms of PVC foams in static tests. Materials Science (Med iagotyra). 2004. No. 10 (1), рр. 34–39.
3. Fedyuk R.S., Mochalov A.V., Simonov V.A. Trends in the development of norms for thermal protection of buildings in Russia. Vestnik inzhenernyi shkoly DVFU. 2012. No. 2 (11), pp. 39–44. (In Russian).
4. Umnyakova N.P., Tsygankov V.M., Kuzmin V.A. Experimental Heat Engineering Studies for Rational Design of Wall Structures with Reflecting Heat Insulation. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2018. No. 1–2, рр. 38–42. (In Russian).
5. Gnip I.Ya., Kershulis V.I., Vaitkus S.Y. Confidential intervals of the forecast of deformations of creep of polyfoam from polystyrene. Stroitel’nye Materialy [Construction Materials]. 2005. No. 3. рр. 47–49. (In Russian).
6. Gnip I.J., Keršulis V.J., Vaitkus S.J. Analytical description of the creep of expanded polystyrene under compressive loading. Mechanics of Composite materials. 2005. No. 41 (4), pp. 357–364.
7. Semenov V.S., Ter-Zakaryan K.A., Zhukov A.D., Sazonova Yu.V. Features of Realization of Insulation Systems under Conditions of the Far North. Stroitel’nye Materialy [Construction Materials]. 2018. No. 4, рр. 65–69. (In Russian).
8. Semenov V.S., Rozovskaya T.A., Gubsky A.Yu. Prospects of Using Recycled Polyester Fibers for Manufacturing Heat- and Sound Insulation Materials. Stroitel’nye Materialy [Construction Materials]. 2016. No. 6, рр. 21–24. (In Russian).
9. Patent RF 2645190. Zamkovaya tekhnologiya teploizolyatsionnogo materiala dlya besshovnoi svarki soedinitel’nykh zamkov [Castle technology of heat-insulating material for seamless welding of connecting locks]. Declared 26.09.2016. Published 16.02.2018. Bulletin No. 5. (In Russian)
10. Zhukov A.D., Ter-Zakaryan K.A., Tuchaev D.U., Petrovsky E.S. Energy-efficient warming of food stores and vegetable stores. Mezhdunarodnyi sel’skokhozyaistvennyi zhurnal. 2018. No. 1, pp. 65–67. (In Russian).
11. Wang Y., Huang Z., Heng L. Cost-effectiveness assessment of insulated exterior wall of residential buildings in cold climate. International Journal of Project Management. 2007. Vol. 25. Iss. 2, рp. 143–149. DOI: https://doi.org/10.1016/j.ijproman.2006.09.007.
For citation: Zhukov A.D., Ter-Zakaryan K.A., Bessonov I.V., Semenov V.S., Starostin A.V. Systems of construction insulation with the use of foam polyethylene. Stroitel’nye Materialy [Construction Materials]. 2018. No. 9, pp. 58–61. DOI: https://doi.org/10.31659/0585-430X-2018-763-9-58-61 (In Russian).