Seismic Safety of Wall Panels with Ties SPA7.5

The development of large-panel housing construction requires improvement of the design technology and quality materials used. OOO “The Biysk Factory for Making Glass-Fiber Reinforced Plastics” in cooperation with Allbau Software have developed the module of automated design of location of flexible ties SPA7.5 for three-layer panels for the design environment Planbar. To determine the reliability of ties SPA7.5 in the system of three-layer panels when operating in seismic dangerous districts, the relevant tests have been conducted on the basis of the Laboratory of research in seismic reliability of structures of TsNIISK named after V.A. Kucherenko. The tests have confirmed the seismic safety of three-layer panel with ties SPA7.5 when operating in areas with seismicity of 7–9 points.

A.V. KOVRIGIN, Engineer, Head of Technical Support Group (This email address is being protected from spambots. You need JavaScript enabled to view it.),
A.V. MASLOV, Engineer;
A.V. GRANOVSKY, Candidate of Sciences (Engineering), Head of Laboratory, Research Center of Seismic Stability of Constructions (This email address is being protected from spambots. You need JavaScript enabled to view it.) 

¹ OOO “The Biysk Factory for Making Glass-Fiber Reinforced Plastics” (60/1, Leningradskaya Street, Biysk, Altai Krai, 659316, Russian Federation) 
² TsNIISK named after V.A. Kucherenko, JSC Research Center of Construction, (6, bldg.1 2nd Institutskaya Street, 109428, Moscow, Russian Federation)

1. Kovrigin A.G., Maslov A.V., Vald A.A. Factors influencing on reliability of composite ties used in large-panel housing construction. Stroitel’nye Materialy [Construction Materials]. 2017. No. 3, pp. 31–34. (In Russian). 

2. Kovrigin A. G, Maslov A.V. Composite Flexible Bracing in Large-Panel House Building. Stroitel’nye Materialy(In Russian). 

3. Usmanov Sh.I. Formation of economic strategy of development of industrial housing construction in Russia. Politika, gosudarstvo i pravo. 2015. No. 1 (37), pp. 76–79. (In Russian). 

4. Baranova L.N. Development of industrial housing construction and the industry of construction materials in various regions of Russia. Vestnik Rossiiskoi akademii estestvennykh nauk. 2013. No. 3, pp. 61–63. (In Russian). 

5. Lugovoy А.N., Kovrigin A.G. Composite Flexible Bracings for Three-Layered Thermal Efficient Panels. Stroitel’nye Materialy [Construction Materiаls]. 2011. No. 3, pp. 32–33. (In Russian). 

6. Lugovoy А.N. Enhancement of Energy Efficiency of Enclosing Structures. Stroitel’nye Materialy [Construction Materiаls]. 2014. No. 5, pp. 22–24. (In Russian). 

7. Lugovoy А.N., Kovrigin A.G. Three-layer reinforced concrete wall panels with composite flexible communications. Stroitel’nye Materialy [Construction Materiаls]. 2015. No. 5, pp. 35–38. (In Russian). 

8. Hozin V.G., Piskunov A.A., Gizdatullin A.R., Kuklin A.N. Coupling of polimerkompozitny fittings with cement concrete. Izvestiya KazGASU. 2013. No. 1 (23), рр. 214–220. (In Russian). 

9. Blazhko V.P., Granik M.Yu. Flexible bazaltoplastikovy communications for application in three-layer panels of external walls. Stroitel’nye Materialy [Construction Materiаls]. 2015. No. 5, pp. 56–57. (In Russian). 

10. Blaznov A.N., Atyasova E.V., Bychin N.V., Shundrina I.K., Hodakova N.N., Samoylenko V.V. Influence of extent of hardening of vitrification of composite materials, binding on temperature. Yushno-sibirskii nauchnyi vestnik. 2016. No. 1, pp. 13–19. (In Russian).