Increase of Efficiency of Operation of Autoclaved Gas Concrete Production by the Shock Technology at Egorievsky Building Materials Factory

The production experience of Yegoryevsky Plant of Building Materials in the production of autoclaved gas concrete at the technological line Vano-Block 1440 of German Firm Masa- Henke is described. It is shown that the impact technology makes it possible to solve many production goals directed at increasing volumes of finished production output and reducing its self-cost. Information on the conducted modernization of the equipment is presented. The estimation of the professional work of the enterprise staff is made. The increase in the productivity of the technological line by 7.8% of the design capacity, up to1552.5 m3/day of gas concrete products, has been achieved. At that, the total self-cost of production is reduced by 7.8% despite the growth of price of materials, electric energy, gas and transport expenses.

A.Yu. SMIRNOV¹, General Director,
A.M. RUBLEV¹, Director for Production,
A.A. BARANOV¹, Engineer-Technologist, Chief Technologist (This email address is being protected from spambots. You need JavaScript enabled to view it.);
M.V. AKULOVA2, Doctor of Sciences (Engineering) 

¹ OOO “Yegoryevsky Plant of Building Materials (3B, Melanzhistov Street, Yegoryevsk, 140301, Moscow Oblast, Russian Federation) 
² Ivanovo State Polytechnic University (20, 8 Marta Street, Ivanovo, 153037, Russian Federation)

1. Klare M., Ivanov A.K. Production of cellular concrete products using the technology of the company «Maza- Henke». Stroitel’ny rynok. 2008. No. 5, pp. 11–14. 

2. Vishnevsky A.A., Grinfeld G.I. Shock or injection? Paper reports of the scientific-practical conference «Modern autoclaved aerated concrete». Saint-Petersburg. 2015, pp. 25–31. (In Russian). 

3. Sazhnev N.N. etc. Proizvodstvo yacheistobetonnykh izdeliy: teoriya i praktika [Production of cellular concrete products: theory and practice]. Minsk: Strinko. 2010. 464 p. 

4. Kaftaeva M.V. Theoretical substantiation of the main redistribution of the technology of production of cellular silicate materials of autoclave hardening. Doctor Diss. (Engeeniring). Belgorod. 2013. 299 p. (In Russian). 

5. Korolev A.S., Voloshin E.A., Trofimov B.Ya. Optimization of composition and structure structural-heat-insulating cellular concrete. Stroitel’nye Materialy [Construction Materials]. 2004. No. 3, pp. 30–32. (In Russian). 

6. Sazhnev N.P., Sazhnev N.N. Energy-saving shock technology for the production of cellular concrete products and structures. Budivel’ni materiali virobi ta sanitarna tekhnika. 2009. No. 327, pp. 102–106. 

7. Baranov A.A. Resursosberegajushchaja technology of application of a multistage method of processing of undercutting layer. Paper reports of the scientific-practical conference «Modern autoclaved aerated concrete». Ekaterinburg. 2017, pp. 22–26. (In Russian). 

8. Fedosov S.V., Gruzintseva N.A., Matrokhin A.Yu. Modeling of conditions for ensuring the quality of products of the enterprise for the production of building materials, taking into account the level of professionalism of the personnel potential. Stroitel’nye Materialy [Constrution Materials]. 2015. No. 12, pp. 65–67. (In Russian).