Frame-Monolithic Technology of Construction of Low-Rise Buildings Made of Foam Gypsum and Steel Thin-Walled Structures

Number of journal: №8-2018
Autors:

B.G. BULATOV
R.I. SHIGAPOV
M.A. IVLEV
I.V. NEDOSEKO

DOI: https://doi.org/10.31659/0585-430X-2018-762-8-36-39
УДК: 624.014:624.012.4

AbstractAbout AuthorsReferences
The design of frame-monolithic buildings on the basis of light steel thin-walled structures (LSTS) with filling of internal space of walls and ceilings with monolithic foam gypsum is described. Low-rise frame buildings on the basis of LSTS are widespread abroad and now represent a promising direction for housing construction in Russia. The use of LSTS together with monolithic foam gypsum in low-rise frame construction will reduce the material consumption and increase the fire resistance of buildings. The main advantages of foam gypsum in comparison with other thermal insulation materials are presented. The use of monolithic foam gypsum, as the calculation shows, can increase more than three times the distance between the pillars of the frame and, accordingly, almost as much to reduce the consumption of steel. The results of testing the bearing capacity and deformability of an experimental design of frame-monolithic overlap on the basis of LSTS and foam gypsum are presented.
B.G. BULATOV1 , Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.);
R.I. SHIGAPOV2 , Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.);
M.A. IVLEV3 , Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.V. NEDOSEKO3 , Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)

1 Bashkir State Agrarian University (34, 50-letiya Octyabrya Street, Ufa, Republic of Bashkortostan, 450001, Russian Federation)
2 OOO «Ufimskaya gipsovaya kompaniya» (8, Proizvodstvennaya Street, Ufa, Republic of Bashkortostan, 450069, Russian Federation)
3 Ufa State Petroleum Technological University (1, Kosmonavtov Street, Ufa, Republic of Bashkortostan, 450062, Russian Federation)

1. Gaysin A.M., Babkov V.V. Analysis of Bearing External Walls of Multistory Residential Buildings in the Republic of Bashkortostan from the Position of Specific Thermal Protection Characteristic. Stroitel’nyeMaterialy [Construction Materials]. 2016. No. 10, pp. 55–57. (In Russian).
2. Rakhimov R.Z., Khaliullin M.I. State and Tendencies of Development of the Gypsum Building Materials Industry. Stroitel’nye Materialy [Construction Materials]. 2010. No. 12, pp. 44–46. (In Russian).
3. Vinnichenko V., Ryazanov A. Ecological indices of manufacture of Portland cement clinker and production of the dolomite clinker. MATEC Web of Conferences 116, 01020 (2017). DOI: 10.1051/matecconf/201711601020.
4. Vinnichenko V.I., Ryazanov, A.N., Vicenco, N.Yu. Thermodynamic Evaluation of Formation Conditions of Primary Clinker Minerals When Burning DolomiteContaining Charge. Stroitel’nye Materialy [Construction Materials]. 2016. No. 10, pp. 76–83. (In Russian).
5. Ryazanov A.N., Vinnichenko V.I., Nedoseko I.V., Ryazanov V.A., Ryazanov A.A. Structure and Properties of Lime-Ash Cement and its Modification. Stroitel’nye Materialy [Construction Materials]. 2018. No. 1–2, pp. 18–22. (In Russian).
6. Nedoseko I.V., Babkov V.V., Aliyev P.P., Kuzmin V.V. The use of structural and thermal insulation expanded clay concrete in low-rise construction Zhilishchnoe Stroitel’stvo [Housing Construction]. 2008. No. 3, pp. 26–27. (In Russian).
7. Gaifullin A.R., Khaliullin M.I., Rakhimov R.Z. Construction plaster with additives haydite dust. Izvestiya KGАSU. 2012. No. 2, pp. 166–171. (In Russian).
8. Sagdatullin D.G., Morozova N.N., Khozin V.G. Rheological characteristics of water suspensions of composite gypsum binder and its components. Izvestiya KGАSU. 2009. No. 2 (12), pp. 263–268. (In Russian).
9. Bulatov B.G., Nedoseko I.V. Development of the structure of the production management system of wall products based on gypsum-containing waste. Vestnik Bashkirskogo gosudarstvennogo agrarnogo universiteta. 2014. No. 2, pp. 109–112. (In Russian).
10. Nedoseko I.V., Babkov V.V., Yunusov S.S., Gaitova A.R., Akhmadullina I.I. Gypsum and Gypsum-Slag Compositions on the Basis of Natural Raw Materials and Industrial Waste. Stroitel’nye Materialy [Construction Materials]. 2012. No. 8, pp. 66–68. (In Russian).
11. Shigapov R.I., Babkov V.V., Khaliullin M.I. The use of foamed gypsum in low-rise construction. Izvestiya KGASU. 2014. No. 2 (28), pp. 211–216. (In Russian).
12. Bessonov I.V., Shigapov R.I., Babkov V.V. HeatInsulating Foamed Gypsum in Low-Rise Construction. Stroitel’nye Materialy [Construction Materials]. 2014. No. 7, pp. 9–13. (In Russian).
13. Valiev E.T., Muftakhova Y.R., Salikhov V.V., Shigapov R.I., Nedoseko I.V. Application of foamed gypsum in the construction of low-rise buildings with a supporting framework of lightweight steel sections. Vestnik Belgorodskogo gosudarstvennogo tekhnologicheskogo universiteta im. V.G. Shuhova. 2018. No. 5, pp. 20–24. (In Russian).

For citation: Bulatov B.G., Shigapov R.I., Ivlev M.A., Nedoseko I.V. Frame-monolithic technology of construction of low-rise buildings made of foam gypsum and steel thin-walled structures. Stroitel’nye Materialy [Construction Materials]. 2018. No. 8, pp. 36–39. DOI: https://doi.org/10.31659/0585-430X-2018-762-8-36-39 (In Russian).


Print   Email