AbstractAbout AuthorsReferences
It is shown that the sub-branch of industry of dry building mixes in Russia began to be formed since 1986 when in Moscow the first plant was commissioned. Mistakes of designing and technology of the first plant have been analyzed. At present, there are about 200 producers of dry building mixes (DBM) both on the gypsum and cement bases. It is argued that the process engineers of DBM plants should have a set of specific knowledge and practical skills which at present the university training can’t provide. The list of theoretical knowledge and practical skills which the technologist has to possess for successful work at plants of dry mixes is presented. Examples of the production of DBM which do not fully meet the technological properties to their purpose are given. The necessity of the influence of the technologist not only on the final performance properties of mixtures, but also on the workability of their application is substantiated. It is proposed to adapt the previously developed programs for the training of technologists for plants both as part of university training, and in order to improve the skills of operating plant workers.
A.A. FEDULOV, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
1. Vasilik P.G., Golubev I.V. Cracks in plasters. Stroitel’nye Materialy [Construction Materials]. 2003. No. 4, pp. 14–16. (In Russian).
2. Paliev A.I., Shibaev S.Yu. SP “TIGI Knauf” JSC launches a new factory. Stroitel’nye Materialy [Construction Materials]. 1997. No. 9, pp. 14–15. (In Russian).
3. Eferina T.V., Khilov K.V. The market of dry construction mixtures: the specificity of promotion. Stroitel’nye Materialy [Construction Materials]. 2005. No. 8, pp. 77–79. (In Russian).
4. Botka E. The market of dry building mixtures in Russia and CIS countries: the state and prospects. Tsement i ego primenenie. 2007. No. 5, pp. 60–64. (In Russian).
5. Botka E. Market of dry building mixtures: change of dynamics. Tsement i ego primenenie. 2008. No. 5, pp. 133–134. (In Russian).
6. Botka E. The market of dry building mixtures of Russia: preliminary results of 2016 and short-term prospects. Tsement i ego primenenie. 2016. No. 6, pp. 38–39. (In Russian).
7. Teleshov A.V., Sapozhnikov V.A. New factories for production of dry mixes. Stroitel’nye Materialy [Construction Materials]. 2003. No. 11, pp. 12–15. (In Russian).
8. Round table: Modern equipment for the production of dry construction mixtures for general construction and special purposes. Prospects for equipping the shops. Sukhie stroitel’nye smesi. 2013. No. 3, pp. 18–24. (In Russian).
9. Vorob’ev Kh.S. Gipsovye vyazhushchie i izdeliya: zarubezhnyi opyt [Gypsum binders and products: foreign experience]. Moscow: Stroyizdat. 1983. 201 p.
10. Vetergrove H. Homogenizer Claudius Peters is a gypsum technology for reduction of expenditure and improvement of quality. Stroitel’nye Materialy [Construction Materials]. 2010. No. 7, pp. 7–9. (In Russian).
11. Fedulov A.A. Tekhnologiya gipsovykh otdelochnykh materialov i izdelii [Technology of gypsum finishing materials and products]. Moscow: RIF «STROIMATERIALY». 2018. 240 p.
12. Belov V.V., Obraztsov I.V. The use of virtual simulators for employees of industrial laboratories. Stroitel’nye Materialy [Construction Materials]. 2015. No. 3, p. 64–67.
2. Paliev A.I., Shibaev S.Yu. SP “TIGI Knauf” JSC launches a new factory. Stroitel’nye Materialy [Construction Materials]. 1997. No. 9, pp. 14–15. (In Russian).
3. Eferina T.V., Khilov K.V. The market of dry construction mixtures: the specificity of promotion. Stroitel’nye Materialy [Construction Materials]. 2005. No. 8, pp. 77–79. (In Russian).
4. Botka E. The market of dry building mixtures in Russia and CIS countries: the state and prospects. Tsement i ego primenenie. 2007. No. 5, pp. 60–64. (In Russian).
5. Botka E. Market of dry building mixtures: change of dynamics. Tsement i ego primenenie. 2008. No. 5, pp. 133–134. (In Russian).
6. Botka E. The market of dry building mixtures of Russia: preliminary results of 2016 and short-term prospects. Tsement i ego primenenie. 2016. No. 6, pp. 38–39. (In Russian).
7. Teleshov A.V., Sapozhnikov V.A. New factories for production of dry mixes. Stroitel’nye Materialy [Construction Materials]. 2003. No. 11, pp. 12–15. (In Russian).
8. Round table: Modern equipment for the production of dry construction mixtures for general construction and special purposes. Prospects for equipping the shops. Sukhie stroitel’nye smesi. 2013. No. 3, pp. 18–24. (In Russian).
9. Vorob’ev Kh.S. Gipsovye vyazhushchie i izdeliya: zarubezhnyi opyt [Gypsum binders and products: foreign experience]. Moscow: Stroyizdat. 1983. 201 p.
10. Vetergrove H. Homogenizer Claudius Peters is a gypsum technology for reduction of expenditure and improvement of quality. Stroitel’nye Materialy [Construction Materials]. 2010. No. 7, pp. 7–9. (In Russian).
11. Fedulov A.A. Tekhnologiya gipsovykh otdelochnykh materialov i izdelii [Technology of gypsum finishing materials and products]. Moscow: RIF «STROIMATERIALY». 2018. 240 p.
12. Belov V.V., Obraztsov I.V. The use of virtual simulators for employees of industrial laboratories. Stroitel’nye Materialy [Construction Materials]. 2015. No. 3, p. 64–67.
For citation: Fedulov A.A. A modern engineer-technologist for production of dry building mixes. Stroitel’nye Materialy [Construction Materials]. 2018. No. 8, pp. 40–42. DOI: https://doi. org/10.31659/0585-430X-2018-762-8-40-42 (In Russian).