AbstractAbout the AuthorReferences
The efficiency of PPFPAstiki depends on their proper selection to specific mininggeological and miningengineering conditions of operation of the equipment. In this connection, the questionnaire for fill in is sent to the enterprise desiring to get antisticking plates. Further, on the basis of the questionnaire, the strength of materials is evaluated according to the scale of professor M.M. Protodiakonov and the selection of raw materials for producing the required type of an antisticking plate is made, and according to the methodology of OOO “AsTik KP”, its thickness is determined for providing the warranty period of work after putting it into operation. This principle of selection of PPFPAstiki and determination of the plate optimal thickness make it possible to solve reliably and efficiently the problems relating to the elimination of sticking of wetted materials on the working surfaces of the equipment
V.G. KUZNETSOV, President, General Director (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.P. KUZNETSOV, Commercial Director (This email address is being protected from spambots. You need JavaScript enabled to view it.)
I.P. KUZNETSOV, Commercial Director (This email address is being protected from spambots. You need JavaScript enabled to view it.)
OOO «As-Tik KP» (16, Teterinsky Lane, Moscow, 109004, Russian Federation)
1. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P. i dr. Polimernye protivonalipayushchie futerovochnye plasti- ny – Astiki – effektivnoe reshenie problemy ustraneniya nalipaniya uvlazhnennykh materialov na rabochie pover- khnosti oborudovaniya [Polymer anti-lamination lining plates – Astiki – an effective solution to the problem of eliminating the sticking of moistened materials on the working surfaces of equipment]. Moscow: OOO «Na- dezhda na Yartsevskoi». 2013. 79 p.
2. Kuznetsov V.G., Zatkovetskii V.M., Kuznetsov I.P. and al. Polymer lining plates – an effective solution to the problem of sticking moistened materials on the working surfaces of process equipment. Stroitel’nye Materialy [Construction Materials]. 2005. No. 5, pp. 32–34. (In Russian).
3. Kuznetsov V.G., Kuznetsov I.P. Determination of the thickness of the polymer anti-lamination lining plate for various operating conditions of the equipment. Stroitel’nye Materialy [Construction Materials]. 2007. No. 5, pp. 13–14. (In Russian).
4. Kuznetsov V.G., Kuznetsov I.P. Kopylov S.V., Sitni- kov S.N. and etc. Correct selection of polymer anti-lamination lining plates is a guarantee of efficient operation of technological equipment. Gornyi zhurnal. 2008. No. 4, pp. 80–81. (In Russian).
5. Kuznetsov V.G., Kuznetsov I.P., Kopylov S.V. Estimation of economic efficiency of introduction of polymer anti-lamination lining plates. Stroitel’nye Materialy [Construction Materials]. 2006. No. 9, p. 48. (In Russian).
6. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P., Kochetov E.V. Efficient operation of process equipment in the factory pelletizing JSC «Mikhailovsky GOK» when working on moist raw materials. Gornyi zhurnal. 2013. No. 12, pp. 71–73. (In Russian).
7. Kuznetsov V.G., Kuznetsov I.P., Borodin A.A. i dr. factory production of bunkers equipped with efficient means of struggle with adhering of materials – PPFP-Astiki. Stroitel’nye Materialy [Construction Materials]. 2013. No. 5, pp. 54–56. (In Russian).
8. Kuznetsov V.G., Kochetov E.V., Kuznetsov I.P. Improvement of quality of working surfaces of technological equipment at the design and manufacturing stages due to the use of an effective means of combating the sticking of raw materials PFPP-Astiki. Mekhanizatsiya stroitel’stva. 2015. No. 1, pp. 29–31. (In Russian).
9. Kuznetsov V.G., Kuznetsov I.P., Lyapunov A.V., Blyudenov A.P., Gontarenko B.Yu. The use of polymeric materials to eliminate the buildup of wet magnetitic concentrate on work surfaces of equipment on enrichment plant AO «EVRAZ KGOK». Stroitel’nye Materialy [Construction Materials]. 2016. No. 6, pp. 59–60. (In Russian).
10. Kuznetsov V.G., Kiselev N.N., Kochetov E.V., Kuznetsov I.P. Reducing the Influence of Stickiness of Rocks and Raw Materials on Working Efficiency of Equipment Due To Application of PPFP-Astiki. Stroitel’nye Materialy [Construction Materials]. 2017. No. 1–2, pp. 99–103. (In Russian).
11. Kuznetsov V.G., Kuznetsov I.P. Sealing arrangement made of PPFP-Astiki for receiving hoppers of belt conveyers. Stroitel’nye Materialy [Construction Materials]. 2017. No. 5, pp. 60–62. (In Russian).
2. Kuznetsov V.G., Zatkovetskii V.M., Kuznetsov I.P. and al. Polymer lining plates – an effective solution to the problem of sticking moistened materials on the working surfaces of process equipment. Stroitel’nye Materialy [Construction Materials]. 2005. No. 5, pp. 32–34. (In Russian).
3. Kuznetsov V.G., Kuznetsov I.P. Determination of the thickness of the polymer anti-lamination lining plate for various operating conditions of the equipment. Stroitel’nye Materialy [Construction Materials]. 2007. No. 5, pp. 13–14. (In Russian).
4. Kuznetsov V.G., Kuznetsov I.P. Kopylov S.V., Sitni- kov S.N. and etc. Correct selection of polymer anti-lamination lining plates is a guarantee of efficient operation of technological equipment. Gornyi zhurnal. 2008. No. 4, pp. 80–81. (In Russian).
5. Kuznetsov V.G., Kuznetsov I.P., Kopylov S.V. Estimation of economic efficiency of introduction of polymer anti-lamination lining plates. Stroitel’nye Materialy [Construction Materials]. 2006. No. 9, p. 48. (In Russian).
6. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P., Kochetov E.V. Efficient operation of process equipment in the factory pelletizing JSC «Mikhailovsky GOK» when working on moist raw materials. Gornyi zhurnal. 2013. No. 12, pp. 71–73. (In Russian).
7. Kuznetsov V.G., Kuznetsov I.P., Borodin A.A. i dr. factory production of bunkers equipped with efficient means of struggle with adhering of materials – PPFP-Astiki. Stroitel’nye Materialy [Construction Materials]. 2013. No. 5, pp. 54–56. (In Russian).
8. Kuznetsov V.G., Kochetov E.V., Kuznetsov I.P. Improvement of quality of working surfaces of technological equipment at the design and manufacturing stages due to the use of an effective means of combating the sticking of raw materials PFPP-Astiki. Mekhanizatsiya stroitel’stva. 2015. No. 1, pp. 29–31. (In Russian).
9. Kuznetsov V.G., Kuznetsov I.P., Lyapunov A.V., Blyudenov A.P., Gontarenko B.Yu. The use of polymeric materials to eliminate the buildup of wet magnetitic concentrate on work surfaces of equipment on enrichment plant AO «EVRAZ KGOK». Stroitel’nye Materialy [Construction Materials]. 2016. No. 6, pp. 59–60. (In Russian).
10. Kuznetsov V.G., Kiselev N.N., Kochetov E.V., Kuznetsov I.P. Reducing the Influence of Stickiness of Rocks and Raw Materials on Working Efficiency of Equipment Due To Application of PPFP-Astiki. Stroitel’nye Materialy [Construction Materials]. 2017. No. 1–2, pp. 99–103. (In Russian).
11. Kuznetsov V.G., Kuznetsov I.P. Sealing arrangement made of PPFP-Astiki for receiving hoppers of belt conveyers. Stroitel’nye Materialy [Construction Materials]. 2017. No. 5, pp. 60–62. (In Russian).
For citation: Kuznetsov V.G., Kuznetsov I.P. To the issue of reliable and efficient application of ppfpastiki at equipment operating with damp materials. Stroitel’nye Materialy [Construction Materials]. 2017. No. 8, pp. 45–48. DOI: https://doi.org/10.31659/0585-430X-2017-751-8-45-48. (In Russian).