AbstractAbout the AuthorReferences
As a result of the analysis of operation of equipment used under different mining-geological and mining-technical conditions of operation, it is established that the correctly selected lining materials reliably and efficiently protect the operating surfaces. The most efficient in this segment are sheets-Astike (PPFP-Astiki). They protect operating surfaces both against sticking and full gumming of equipment units, and constructibility of installation and fastening of sheet provides its workability during the interrepair period. The article describes main requirements and recommendations for its industrial installation and fastening on excavator, transport, and technological equipment, as well as presents the variants of schemes of fastening of anti-gumming sheets on operating surfaces of equipment. The use of PPFP-Astiki increases the discharge capacity of load-transfer devices, hoppers, batchers, and other elements on average by 1.6 times, technical performance of excavator technique by 1.3 times as well as significantly reduces hand labor used when cleaning equipment units.
V.G. KUZNETSOV, President, General Director (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.P. KUZNETSOV, Commercial Director (This email address is being protected from spambots. You need JavaScript enabled to view it.)
I.P. KUZNETSOV, Commercial Director (This email address is being protected from spambots. You need JavaScript enabled to view it.)
OOO «As-Tik KP» (16, Teterinsky Lane, Moscow, 109004, Russian Federation)
1. Kuznetsov V.G., Petrov I.V., Kiselev N.N., Rubin S.M. Reducing the sticking of rocks on the working surfaces of mining and processing equipment. Gornyi Zhurnal. 1999. No. 2, pp. 60–63. (In Russian).
2. Kuznetsov V.G., Starovoitov V.M., Surovets V.M., Susev S.V. Reduction of adhesion of raw materials to the working surfaces of process equipment. Tsement i Ego Primenenie. 2000. No. 3, pp. 43–44. (In Russian).
3. Kuznetsov V.G., Kuznetsov I.P., Alekseenko I.P. Decrease in adhesion and freezing of wet coals of Cheremkhovsky and Kuznetsk deposits on metal walls of bunkers. Ugol’. 2004. No. 5, pp. 48–50. (In Russian).
4. Malinov A.V., Polukhin V.N., Khmelev Yu.V., Kuznetsov V.G., Kuznetsov I.P. Increase of accuracy of dosing of weighing hoppers-dosers and elimination of sticking of materials on working surfaces of technological equipment. Steklo i Keramika. 2006. No. 11, pp. 21–23. (In Russian).
5. Kuznetsov V.G., Novikova T.N., Kochetov E.V., Kuznetsov I.P. Increase of efficiency of use of the mining equipment for heavy engineering when working on moistened sticky rocks. Tyazheloe Mashinostroenie. 2012. No. 4, pp. 36–38. (In Russian).
6. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P., Kochetov E.V. Efficient operation of process equipment in the factory pelletizing JSC «Mikhailovsky GOK» when working on moist raw materials. Gornyi Zhurnal. 2013. No. 12, pp. 71–73. (In Russian).
7. Kuznetsov V.G., Kuznetsov I.P., Borodin A.A. i dr. factory production of bunkers equipped with efficient means of struggle with adhering of materials – PPFP-Astiki. Stroitel’nye Materialy [Construction Materials]. 2013. No. 5, pp. 54–56. (In Russian).
8. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P., Kochetov E.V. Enhancement of efficiency of using mountain-transport and technological equipmentof nonferrous metallurgy enterprises on wetted sticky materials. Stroitel’nye Materialy [Construction Materials]. 2011. No. 1–2, pp. 84–87. (In Russian).
9. Kuznetsov V.G., Kuznetsov I.P., Lyapunov A.V., Blyudenov A.P., Gontarenko B.Yu. The use of polymeric materials to eliminate the buildup of wet magnetitic concentrate on work surfaces of equipment on enrichment plant AO «EVRAZ KGOK». Stroitel’nye Materialy [Construction Materials]. 2016. No. 6, pp. 59–60. (In Russian).
10. Kuznetsov V.G., Kuznetsov I.P. To the issue of reliable and efficient application of PPFP-Astiki at equipment operating with damp materials. Stroitel’nye Materialy [Construction Materials]. 2016. No. 8, pp. 45–48. (In Russian).
11. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P. Polymer anti-lamination lining plates are an effective means of eliminating (reducing) adherence of moistened rocks. Zolotodobycha. 2008. No. 112, pp. 32–35. (In Russian).
12. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P. i dr. Polimernye protivonalipayushchie futerovochnye plastiny – Astiki – effektivnoe reshenie problemy ustraneniya nalipaniya uvlazhnennykh materialov na rabochie poverkhnosti oborudovaniya [Polymer anti-lamination lining plates – Astiki – an effective solution to the problem of eliminating the sticking of moistened materials on the working surfaces of equipment]. Moscow: OOO «Nadezhda na Yartsevskoi». 2013. 79 p.
13. Kuznetsov V.G., Kuznetsov I.P. Sealing arrangement made of PPFP-Astiki for receiving hoppers of belt conveyers. Stroitel’nye Materialy [Construction Materials]. 2017. No. 5, pp. 60–62. (In Russian).
14. Kuznetsov V.G., Kochetov E.V., Kuznetsov I.P. Evaluation of the reduction in the production capacity of equipment due to the adhesion of soils to the work surfaces. Mekhanizatsiya Stroitel’stva. 2012. No. 3, pp. 33–35. (In Russian).
15. Kuznetsov V.G., Kochetov E.V., Kuznetsov I.P. Increasing the efficiency of the use of construction equipment on wet ground. Stroitel’nye Materialy [Construction Materials]. 2012. No. 4, pp. 60–62. (In Russian).
2. Kuznetsov V.G., Starovoitov V.M., Surovets V.M., Susev S.V. Reduction of adhesion of raw materials to the working surfaces of process equipment. Tsement i Ego Primenenie. 2000. No. 3, pp. 43–44. (In Russian).
3. Kuznetsov V.G., Kuznetsov I.P., Alekseenko I.P. Decrease in adhesion and freezing of wet coals of Cheremkhovsky and Kuznetsk deposits on metal walls of bunkers. Ugol’. 2004. No. 5, pp. 48–50. (In Russian).
4. Malinov A.V., Polukhin V.N., Khmelev Yu.V., Kuznetsov V.G., Kuznetsov I.P. Increase of accuracy of dosing of weighing hoppers-dosers and elimination of sticking of materials on working surfaces of technological equipment. Steklo i Keramika. 2006. No. 11, pp. 21–23. (In Russian).
5. Kuznetsov V.G., Novikova T.N., Kochetov E.V., Kuznetsov I.P. Increase of efficiency of use of the mining equipment for heavy engineering when working on moistened sticky rocks. Tyazheloe Mashinostroenie. 2012. No. 4, pp. 36–38. (In Russian).
6. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P., Kochetov E.V. Efficient operation of process equipment in the factory pelletizing JSC «Mikhailovsky GOK» when working on moist raw materials. Gornyi Zhurnal. 2013. No. 12, pp. 71–73. (In Russian).
7. Kuznetsov V.G., Kuznetsov I.P., Borodin A.A. i dr. factory production of bunkers equipped with efficient means of struggle with adhering of materials – PPFP-Astiki. Stroitel’nye Materialy [Construction Materials]. 2013. No. 5, pp. 54–56. (In Russian).
8. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P., Kochetov E.V. Enhancement of efficiency of using mountain-transport and technological equipmentof nonferrous metallurgy enterprises on wetted sticky materials. Stroitel’nye Materialy [Construction Materials]. 2011. No. 1–2, pp. 84–87. (In Russian).
9. Kuznetsov V.G., Kuznetsov I.P., Lyapunov A.V., Blyudenov A.P., Gontarenko B.Yu. The use of polymeric materials to eliminate the buildup of wet magnetitic concentrate on work surfaces of equipment on enrichment plant AO «EVRAZ KGOK». Stroitel’nye Materialy [Construction Materials]. 2016. No. 6, pp. 59–60. (In Russian).
10. Kuznetsov V.G., Kuznetsov I.P. To the issue of reliable and efficient application of PPFP-Astiki at equipment operating with damp materials. Stroitel’nye Materialy [Construction Materials]. 2016. No. 8, pp. 45–48. (In Russian).
11. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P. Polymer anti-lamination lining plates are an effective means of eliminating (reducing) adherence of moistened rocks. Zolotodobycha. 2008. No. 112, pp. 32–35. (In Russian).
12. Kuznetsov V.G., Novikova T.N., Kuznetsov I.P. i dr. Polimernye protivonalipayushchie futerovochnye plastiny – Astiki – effektivnoe reshenie problemy ustraneniya nalipaniya uvlazhnennykh materialov na rabochie poverkhnosti oborudovaniya [Polymer anti-lamination lining plates – Astiki – an effective solution to the problem of eliminating the sticking of moistened materials on the working surfaces of equipment]. Moscow: OOO «Nadezhda na Yartsevskoi». 2013. 79 p.
13. Kuznetsov V.G., Kuznetsov I.P. Sealing arrangement made of PPFP-Astiki for receiving hoppers of belt conveyers. Stroitel’nye Materialy [Construction Materials]. 2017. No. 5, pp. 60–62. (In Russian).
14. Kuznetsov V.G., Kochetov E.V., Kuznetsov I.P. Evaluation of the reduction in the production capacity of equipment due to the adhesion of soils to the work surfaces. Mekhanizatsiya Stroitel’stva. 2012. No. 3, pp. 33–35. (In Russian).
15. Kuznetsov V.G., Kochetov E.V., Kuznetsov I.P. Increasing the efficiency of the use of construction equipment on wet ground. Stroitel’nye Materialy [Construction Materials]. 2012. No. 4, pp. 60–62. (In Russian).
For citation: Kuznetsov V.G., Kuznetsov I.P. Recommendations for installation and fastening of lining PPFP-astiki at industrial equipment operating with moistened materials. Stroitel’nye Materialy [Construction Materials]. 2017. No. 11, pp. 43–46. DOI: https://doi.org/10.31659/0585-430X-2017-754-11-43-46. (In Russian).