Design and Erection of Metal Structures of Large-Span Unique Buildings and Facilities

Number of journal: №4-2017
Autors:

Eremeev P.G.
Vedyakov I.I.

DOI: https://doi.org/10.31659/0585-430X-2017-747-4-55-58

AbstractAbout AuthorsReferences
When designing unique facilities, the problems, going beyond current regulations, arise. The development of modern technologies during the last decades, which determined the appearance of new forms, materials, methods of designing and construction, causes new and complex problems. The consequence of novelty and innovations, when changing even main principles of the traditional design and construction, is failures that are caused by single and combined reasons often without precedents. The novelty of technical solutions requires the deep special knowledge, experience in designing of such facilities from an engineer-designer. To provide the quality and high reliability (safety, functionality, and durability) of large-span unique structures, it is necessary to ensure the scientific-technical support of their design and construction, the complex of works of scientific-methodic, expert-control, information-analytical, and organization character with due regard for the use of non-standard design solutions, materials and structures. Examples of the use of modern spatial systems in the construction practice with some recommendations on their design are presented. Issues of ensuring the safety of large-span structures from an avalanche-like (progressive) col- lapse in case of emergency impacts as well issues of the technical monitoring during their erection and operation are outlined.
P.G. EREMEEV, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.I. VEDYAKOV, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.) TSNIISK named after A.V. Kucherenko,

JSC Research Center of Construction (6, bldg. 5, Institutskaya Street, 109428, Moscow, Russian Federation)

1. Eremeev P.G Metal designs of coverings of unique wide-span constructions. Promyshlennoe i grazhdanskoe stroitel’stvo. 2007. No. 3, pp. 19–21. (In Russian). 
2. remeev P.G. Sovremennye stal’nye konstruktsii bol’sheproletnykh pokrytii unikal’nykh zdanii i sooruzhenii [Modern steel structures of wide-span coverings of unique buildings and constructions]. Moscow: ASV. 2009. 336 p. 
3. Otstavnov V.A., Lebedeva I.V. Snow loads of a covering. Montazhnye i spetsial’nye raboty v stroitel’stve. 2005. No. 3, pp. 56–59. (In Russian). 
4. Popov N.A. Rekomendatsii po utochnennomu dinamiches- komu raschetu zdanii i sooruzhenii na deistvie pul’satsionnoi sostavlyayushchei vetrovoi nagruzki [Recommendations about the specified dynamic calculation of buildings and constructions on action of the pulsation component of wind loading]. Moscow: Gosstroi Rossii. 2000. 75 p. 
5. Odesskiy P.D., Kulik D.V. Stal of new generation in unique constructions. Moscow: Intermet Engineering, 2005. 176 p. 
6. Eremeev P.G. Unique wide-span metal designs of coverings. from the Olympic Games 1980 in Moscow till 2014 in Sochi. Vestnik NITs Stroitel’stvo. 2014. No. 11 (34), pp. 93–102. (In Russian). 
7. Sysoyeva E. V. Scientific approaches to calculation and design of wide-span designs. Vestnik MGSU. 2017. T. 12. No. 2 (101), pp. 131–141. (In Russian).

For citation: Eremeev P.G., Vedyakov I.I. Design and erection of metal structures of large-span unique buildings and facilities. Stroitel’nye Materialy [Construction Materials]. 2017. No. 4, pp. 55–58. DOI: https://doi.org/10.31659/0585-430X-2017-747-4-55-58. (In Russian).


Print   Email