Cement compositions modified with an aqueous emulsion of an epoxy oligomer

Number of journal: №5-2017
Autors:

Khozin V.G.
Abdulkhakova A.A.
Starovoitova I.A.
Zykova E.S.

DOI: https://doi.org/10.31659/0585-430X-2017-748-5-73-77

AbstractAbout AuthorsReferences
The prescription and technological parameters for manufacturing polymer cement compositions based on portland cement and aqueous epoxy emulsion cured by aliphatic polyamine were developed. The concentration dependence of the technological and physico-chemical properties of the material was studied. The optimum polymer-cement ratio is established (P/C=0,5). The degree of curing of epoxy resin in the composition of the compositions was studied at different stages of their hardening. With the aid of electron microscopy with elemental analysis there was investigated the structure of polymer-cement compositions at P/C=0,5, in which the dispersion medium is an epoxy polymer, and the disperse phase – a cement stone. The strength of this polymer-cement composition is 2.75 times higher than the strength of a “pure” hardened cement paste

V.G. KHOZIN1, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
A.A. ABDULKHAKOVA1, Magistrand (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.A. STAROVOITOVA1, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
E.S. ZYKOVA2, Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.

1 Kazan State University of Architecture and Engineering (1, Zelenaya Street, 420043, Kazan, Russian Federation) 
2 «NPF «RECON» OOO (Building 7, Technopolis «Khimgrad», 100, Vosstania Street, 420033, Republic of Tatarstan, Russian Federation)

1. Cherkinskii Yu.S. Polimertsementnyi beton [Polymer cement concrete]. Moscow: Stroiizdat, 1984. 213 р. 
2. Fedorov V.M. Meliorative pipes from polymer-cement concrete. Politematicheskii setevoi elektronnyi nauchnyi zhurnal Kubanskogo gosudarstvennogo agrarnogo univer- siteta. 2010. No. 64(10), pp. 1–10. (In Russian). 
3. Busel D.A., Koshevar V.D., Shkadretsova V.G., Kazhuro I.P., Ostrovskaya E.F. Polymer composition for creation of antislip strip. Trudy BGTU. Lesnaya i derevoobrabatyvayushchaya promyshlennost’. 2016. No. 2, pp. 99–104. (In Russian). 
4. Anagnostopoulos C.A., Sapidis G., Papastergiadis E. Fundamental properties of epoxy resin-modified cement grouts. Construction and Building Materials. 2016. No. 125. pp. 184–195. 
5. Khozin V.G. Usilenie epoksidnykh polimerov [Strengthening of epoxy polymers]. Moscow: Dom pechati, 2004. 446 p. 
6. Donnelly, J. H. U. S. Patent 3,198,758; Aug. 3, 1965. 
7. Il’in A.N. Polymer-Modified Cement as Electroinsulated Material for Electrotechnical Systems. Elektrotekhnicheskie sistemy i kompleksy. 2015. No. 1(26), pp. 25–27. (In Russian). 
8. Starovoitova I.A., Drogun A.V., Zykova E.S., Semenov A.N., Khozin V.G., Firsova E.B. Colloidal stability ofaqueous dispersions of epoxy resins. Stroitel’nye mate- rialy. [Construction Materials] 2014. No. 10, pp. 74–77. (In Russian). 
9. Cherkinskii, Yu.S., Slipchenko G.F. Hydration and cur- ing of cements in the presence of polymers. The VI International congress in cement chemistry. Moscow: Stroiizdat, 1976. T. 3, pp. 305–308. 
10. Anagnostopoulos C.A. Effect of different superplasticiz- ers on the physical and mechanical properties of cement grouts. Construction and Building Materials. 2014. No. 50, pp. 162–168

For citation: Khozin V.G., Abdulkhakova A.A., Starovoitova I.A., Zykova E.S. Cement compositions modified with an aqueous emulsion of an epoxy oligomer. Stroitel’nye Materialy [Construction Materials]. 2017. No. 5, pp. 73–77. DOI: https://doi.org/10.31659/0585-430X-2017-748-5-73-77. (In Russian).


Print   Email