Thermoplastics for Asphalt and Cement Concrete Roads Marking

Number of journal: №7-2016
Autors:

A.I. ESHCHENKO
B.G. PECHENY
V.L. KURBATOV
B.S. ASELDEROV
A. HYMAN

DOI: https://doi.org/10.31659/0585-430X-2016-739-7-58-62
УДК: 625.746.533.8

 

AbstractAbout AuthorsReferences
The service life of thermoplastic road marking materials is very limited. This affects the highway traffic safety and capacity of road ways, with cement concrete pavement especially. Higher crack resistance rates of thermoplastics containing the gap composition of aggregates were established. Surfactants, added into the thermoplastic, provide increased crack resistance indicators of coatings applied to the concrete surface. Dilatometer characteristics and crack resistance research gave an opportunity to develop colored thermoplastic compositions for road marking. These compositions have much higher characteristics (technological, physical, mechanical and durability) than the known thermoplastics, including foreign ones.
A.I. ESHCHENKO1 , Candidate of Sciences (Engineering),
B.G. PECHENY1 , Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
V.L. KURBATOV1 , Doctor of Sciences (Economics),
B.S. ASELDEROV1 , Engineer;
A. HYMAN2 , Candidate of Sciences (Chemistry)

1 North-Caucasian Branch of Belgorod State Technological University named after V.G. Shukhov (24, Zheleznodorozhnaya Street, Mineralnye Vody, 357202, Russian Federation)
2 Corporation «CORASFALTOS» (843761 Km.2. Via al Refugio Sede Uis Cuatiguara Piedecuesta-Santander. Bucaramanga, Colombia)

1. Kostova M.Z., Yumashev V.M. Marking of roads in Russia. Information on roads. Highways and bridges. Moscow: Federal State Unitary Enterprise «Information Center on the roads». 2005. Iss. 4. 26 р. (In Russian). 2. AASHTO: M 249-12. Standard Specificacion for White and Yellow Reflective Thermoplastic String Material (Solid Form). STANDARD by American Association of State and Highway Transportation Officials, 2012. 3. Norma Tecnica Colombiana NTC 5867. Materiales Para De-marcacio’n De Pavimentos Termoplastico Retroreflectivo. Blanco y Amarillo (forma solida). (In Spain). 4. Metodicheskie rekomendatsii po naneseniyu dorozhnoy razmetki na tsementobetonnye pokrytiya [Guidelines on the roads marking applying to cement concrete pavement]. Moscow: Rosavtodor. 2004. 12 р. 5. Danil’yan E.A., Aselderov B.Sh., Pecheny B.G. Optimization of quality of asphalt concrete with discontinuous granulometry of fillers. Stroitel’nye Materialy [Construction Materials]. 2012. No. 1, pp. 54–57. (In Russian). 6. Shakurov M.I., Harisov I.I., Garipov R.I. Study of aggregates affect on the properties of the thermoplastic road marking. Trudy Kazanskogo tekhnologicheskogo universiteta. 2010. No. 9, pp. 385–389. 7. Vozny S.I., Yevteyeva S.M., Kochetkov B.V., TalalayA.V. Use of aggregates in road marking on polymer-based materials. Plasticheskie massy. 2014. No. 5–6, pp. 37–40. (In Russian). 8. Ivanova I.S., Grigorieva A.I. Aggregate gradation influence on the road marking thermoplastic fluidity. Dostizheniya vuzovskoy nauki. 2015. No. 19, pp. 131–136. (In Russian). 9. Pecheny B.G. Methods for evaluation of crack resistance. Avtomobilnye dorogi. 2015. No. 6, pp. 70–73. (In Russian).

For citation: 


Print   Email