AbstractAbout AuthorsReferences
The article considers the issues of producing decorative paper-laminated plastics on the basis of melamine-formaldehyde impregnating resins of SP-200, SP-300 brands, which are synthesized in the laboratory with different proportions of the catalyst. The technological stages of receiving melamine-formaldehyde impregnating resins and decorative paper-laminated plastics based on their basis are presented. Properties of the decorative paper-layered plastics derived from seventeen layers of impregnated Kraft paper and two outer layers of decorative paper-resin film have been experimentally evaluated. The analysis of results obtained shows that decorative paper-laminated plastics on the basis of melamine-formaldehyde resins have improved physical and mechanical properties, their manufacture is cost-effective and safer for the environment. Characteristics of the plastic produced correspond to normative and technical requirements; at present, the work on the serial development of this product is carried out.
V.E. TSVETKOV, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
A.S. PAS’KO, Engineer,
A.A. TESOVSKY, Engineer,
O.P. MACHNEVA, Candidate of Sciences (Engineering),
Yu.A. SEMOCHKIN, Candidate of Sciences (Engineering)
A.S. PAS’KO, Engineer,
A.A. TESOVSKY, Engineer,
O.P. MACHNEVA, Candidate of Sciences (Engineering),
Yu.A. SEMOCHKIN, Candidate of Sciences (Engineering)
Moscow State Forest University (1, 1st Institutskaya street, 141005, Mytischi, Moscow region)
1. Barash L.I. Sloistye plastiki, dekorativnye poverkhnosti [Laminates, decorative surfaces]. SPb.: Khimizdat, 2007. 256 p. (In Russian).
2. Barash L.I. Sovremennoe proizvodstvo dekorativnykh sloistykh plastikov [Modern production of decorative laminated plastics]. SPb.: Khimizdat, 2004. 200 p. (In Russian).
3. Ishchenko T. L., Lublinskaya O. V., Pokhilenko V. M. Study of the wettability of the surface of the decorative laminate. Aktual’nye napravleniya nauchnykh issledovanii XXI veka: teoriya i praktika. 2014. Vol. 2. No. 2-1. pp. 136–142. (In Russian).
4. Plotkin L.G. Tekhnologiya i oborudovanie propitki bumagi polimerami [Technology and equipment for impregnation of paper with polymers]. M.: Lesnaya promyshlennost’, 1975. 144 p. (In Russian).
5. Azarov V.I., Tsvetkov V.E. Tekhnologiya svyazuyushchikh i polimernykh materialov [Technology binders and polymeric materials]. M.: Lesnaya promyshlennost’. 1985. 216 p. (In Russian).
6. Plotkin L.G., Shalun G.B. Dekorativnye bumazhnosloistye plastiki [Decorative laminates]. M.: Lesnaya promyshlennost’, 1978. 328 p. (In Russian).
7. Tsvetkov V.E., Pas’ko Yu.V., Kremnev K.V., Machneva O.P. Polimery v proizvodstve drevesnykh materialov [Polymers in the production of wood-based materials]. M.: MGUL, 2007. 55 p. (In Russian).
2. Barash L.I. Sovremennoe proizvodstvo dekorativnykh sloistykh plastikov [Modern production of decorative laminated plastics]. SPb.: Khimizdat, 2004. 200 p. (In Russian).
3. Ishchenko T. L., Lublinskaya O. V., Pokhilenko V. M. Study of the wettability of the surface of the decorative laminate. Aktual’nye napravleniya nauchnykh issledovanii XXI veka: teoriya i praktika. 2014. Vol. 2. No. 2-1. pp. 136–142. (In Russian).
4. Plotkin L.G. Tekhnologiya i oborudovanie propitki bumagi polimerami [Technology and equipment for impregnation of paper with polymers]. M.: Lesnaya promyshlennost’, 1975. 144 p. (In Russian).
5. Azarov V.I., Tsvetkov V.E. Tekhnologiya svyazuyushchikh i polimernykh materialov [Technology binders and polymeric materials]. M.: Lesnaya promyshlennost’. 1985. 216 p. (In Russian).
6. Plotkin L.G., Shalun G.B. Dekorativnye bumazhnosloistye plastiki [Decorative laminates]. M.: Lesnaya promyshlennost’, 1978. 328 p. (In Russian).
7. Tsvetkov V.E., Pas’ko Yu.V., Kremnev K.V., Machneva O.P. Polimery v proizvodstve drevesnykh materialov [Polymers in the production of wood-based materials]. M.: MGUL, 2007. 55 p. (In Russian).
For citation: