AbstractAbout AuthorsReferences
Due to the increasing competition at the market of wall materials manufactures, the problems of improving the quality of products can’t be solved without re-equipment of factories. Replacement of operational equipment which don’t provide an adequate level of contemporary technology and selection of the new import equipment widely presented at the market, raise the problem of compatibility with local materials, one of which is lime. Replacement of the press equipment only which in turn needs the molding mixture of stable composition can’t be considered as re-equipment. The analysis and results of the study of the influence of quick-slaking lime on the equipment operation in the processing chain are presented. Data on the influence of lime activity, a binder and their content in the mixture on the quality of molding mixture and conditions of mixing in the course of mixture preparation are presented. The correct placement of modern equipment in the processing chain with due regard for the quality of raw components is the key to successful operation of the entire production
G.V. KUZNETSOVA, Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.)
Kazan State University of Architecture and Engineering (1, Zelenaya Street, 420043, Kazan, Republic of Tatarstan, Russian Federation)
1. Semenov A.A. Silicate Wall Materials Market and Problems of Providing Industry with Raw Materials. Stroitel’nye Materialy [Construction Materials]. 2015. No. 12, pp. 40–43. (In Russian).
2. Sulima-Grudzinskiy A.V. Some Actual Problems in the Field of Equipment for Silicate Products Manufacture. Stroitel’nye Materialy [Construction Materials]. 2015. No. 3, pp. 53–62. (In Russian).
3. Kuznetsova G.V., Morozova N.N. Problems of Replacement of Traditional Technology of Silicate Brick with Preparation of a Lime-Siliceous Binder by Direct Technology. Stroitel’nye Materialy [Construction Materials]. 2013. No. 9, pp. 14–18. (In Russian).
4. Klare M., Ivanov A.K. Application of modular wall elements for optimization of productions. Stroitel’nye Materialy [Construction Materials]. 2011. No.9, pp.17–20. (InRussian).
5. Kuznetsova G.V. Features of a grinding limy and silicic knitting in production of silicate materials. Stroitel’nye Materialy [Construction Materials]. 2011. No.9, pp.14–17. (InRussian).
6. Klare D. Equipment of the AAC-Concept GmbH company for production of a silicate brick. Stroitel’nye Materialy [Construction Materials]. 2011. No. 9, pp. 25. (InRussian).
7. Kuznetsova G.V., Morozova N.N. Influence of Components of a Lime-Siliceous Binder on Cohesion of Molding Material for Pressing. Stroitel’nye Materialy [Construction Materials]. 2012. No. 12, pp. 69–72. (In Russian).
8. Khavkin L.M. Tekhnologiya silikatnogo kirpicha [Technology of a silicate brick]. Moscow: Ekolit. 2011. 384 p.
9. Kuznetsova G.V., Morozova N.N. Influence of a Corrective Additive on Properties of a Lime-Siliceous Binder. Stroitel’nye Materialy [Construction Materials]. 2013. No. 12, pp. 12–14. (In Russian).
10. Kuznetsova G.V. Method for Pressing of Silicate Brick and Method for Defining Its Raw Strength. Stroitel’nye Materialy [Construction Materials]. 2015. No. 12, pp. 50–54. (In Russian).
2. Sulima-Grudzinskiy A.V. Some Actual Problems in the Field of Equipment for Silicate Products Manufacture. Stroitel’nye Materialy [Construction Materials]. 2015. No. 3, pp. 53–62. (In Russian).
3. Kuznetsova G.V., Morozova N.N. Problems of Replacement of Traditional Technology of Silicate Brick with Preparation of a Lime-Siliceous Binder by Direct Technology. Stroitel’nye Materialy [Construction Materials]. 2013. No. 9, pp. 14–18. (In Russian).
4. Klare M., Ivanov A.K. Application of modular wall elements for optimization of productions. Stroitel’nye Materialy [Construction Materials]. 2011. No.9, pp.17–20. (InRussian).
5. Kuznetsova G.V. Features of a grinding limy and silicic knitting in production of silicate materials. Stroitel’nye Materialy [Construction Materials]. 2011. No.9, pp.14–17. (InRussian).
6. Klare D. Equipment of the AAC-Concept GmbH company for production of a silicate brick. Stroitel’nye Materialy [Construction Materials]. 2011. No. 9, pp. 25. (InRussian).
7. Kuznetsova G.V., Morozova N.N. Influence of Components of a Lime-Siliceous Binder on Cohesion of Molding Material for Pressing. Stroitel’nye Materialy [Construction Materials]. 2012. No. 12, pp. 69–72. (In Russian).
8. Khavkin L.M. Tekhnologiya silikatnogo kirpicha [Technology of a silicate brick]. Moscow: Ekolit. 2011. 384 p.
9. Kuznetsova G.V., Morozova N.N. Influence of a Corrective Additive on Properties of a Lime-Siliceous Binder. Stroitel’nye Materialy [Construction Materials]. 2013. No. 12, pp. 12–14. (In Russian).
10. Kuznetsova G.V. Method for Pressing of Silicate Brick and Method for Defining Its Raw Strength. Stroitel’nye Materialy [Construction Materials]. 2015. No. 12, pp. 50–54. (In Russian).
For citation: