Foamed Composite Materials On the Basis of Polyvinylchloride

Number of journal: №3-2016
Autors:

L.A. ABDRAKHMANOVA
A.M. ISLAMOV
V. KH. FAKHRUTDINOVA

DOI: https://doi.org/10.31659/0585-430X-2016-735-3-82-84
УДК: 678.743.22

 

AbstractAbout Authors
Results of the experimental research in the modification of non-plasticized PVC-compositions with a reactive oligomer, polyisocyanate, with the purpose to obtain materials and products of various functions are presented. A “temporary” plasticizing impact of the oligomer on PVC leading to the improvement in processability of compositions and strength properties of composites is shown. The study of expanding compositions with the purpose to obtain polyvinylchloride materials of an integral structure which combine maximum possible strength and low density has been carried out.
L.A. ABDRAKHMANOVA, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
A.M. ISLAMOV, Engineer;
V. KH. FAKHRUTDINOVA, Candidate of Sciences (Chemistry)

Kazan State University of Architecture and Engineering (1, Zelenaya Street, Kazan, 420043, Russian Federation)[/tab] 1. Pakharenko V.A., Pakharenko V.V., Yakovleva R.A. Plastmassy v stroitel’stve [Plastic construction]. SaintPetersburg: Nauchnye osnovy i tekhnologii. 2010. 358 p.
2. Pol D.R., Baknell K.B. Polimernye smesi [Polymer blends]. T. 1. Saint-Petersburg: Nauchnye osnovy i tekhnologii. 2009. 606 p.
3. Kuleznev V.N. Smesi i splavy polimerov (konspekt lektsii) [Alloys and blends of polymers (lecture notes)]. SaintPetersburg: Nauchnye osnovy i tekhnologii. 2013. 216 p.
4. Islamov A.M., Fakhrutdinova V.Kh., Abdrakhmanova L.A. Structural features of the formation of the modified PVC compounds. Materials of II All-Russian scientific conference of young scientists with international participation «Advanced materials technology and construction». Tomsk: TSUAE. 2015. pp. 339–342. (In Russian).
5. Islamov A.M., Fakhrutdinova V.Kh., Abdrakhmanova L.A., Starostina I.A., Yagund E.M., Kuznetsova L.M. Surface strengthening of PVC by polyisocyanate. Izvestiya vuzov. Stroitel’stvo. 2015. No. 3. pp. 28–33. (In Russian).
6. Ermakov S.N., Kravchenko T.P. Compatible polymers. Thermodynamic and chemical aspects // Plasticheskie massy. 2012. No. 4. pp. 32–39. (In Russian).
7. Buist J.M. Kompozitsionnye materialy na osnove poliuretanov [Composite materials based on polyurethanes]. Moscow: Khimiya. 1982. 240 p.
8. Klempner D., Sendzharevich V. Polimernye peny i tekhnologii vspenivaniya [Handbook of polymeric foams and foam technology]. Saint-Petersburg: Professiya. 2009. 600 p.

For citation: 


Print   Email