Efficient Masonry Mortars for Autoclaved Wall Materials

Number of journal: №12-2016
Autors:

V.S. LESOVIK
L.Kh. ZAGORODNYUK
A.A. KUPRINA
M.Yu. ELISTRATKIN
A.N. VOLODChENKO

DOI: https://doi.org/10.31659/0585-430X-2016-744-12-22-25
УДК: 691.5

 

AbstractAbout AuthorsReferences
Efficient Masonry Mortars for Autoclaved Wall Materials Taking into account the use of the law affinity structures, efficient masonry mortars for autoclaved wall materials on the basis of composite binders obtained as a result of cement and different mineral fillers, gas silicate, silicate brick and quartz sand, grinding in the vibrating mill have been developed. Complex studies of stones on the basis of synthesized composite binders, ceramic brick, silicate brick, cement concrete, have been conducted on different bases. Adhesion properties of masonry mortars have been studied on different bases. The study of shrinking deformations and indexes of heat expansion of masonry mortars of different compositions has been conducted. The compression strength of developed masonry mortars is 3–3.5 times higher than conventional mortars, their adhesion is 2 times higher, they are cheaper than dry building mixes of analogues purposes.
V.S. LESOVIK1, Doctor of Sciences (Engineering),
L.Kh. ZAGORODNYUK1, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
A.A. KUPRINA 2, Candidate of Sciences (Engineering), Head of the Test Laboratory (This email address is being protected from spambots. You need JavaScript enabled to view it.);
M.Yu. ELISTRATKIN 1, Candidate of Sciences (Engineering),
A.N. VOLODChENKO1 , Candidate of Sciences (Engineering) 

1 Belgorod State Technological University named after V.G. Shukhova (46, Kostyukov Street, Belgorod, 308012, Russian Federation) 
2 OOO «VNIISTROM-NV» (117, Karla Marksa Street, Kraskovo Village, Lyubertsy District, Moscow Region, 140050, Russian Federation)

1. Lesovik V.S. Geonika (geommimetika). Primery realizatsii v stroitel’nom materialovedenii: Monografiya [Geonika (geommimetika). Examples of implementation in building materials: Monograph]. Belgorod: BGTU. 2016. 287 p.
2. Orlovich R.B., Derkach V.N. Evaluation of the strength of mortars when examining buildings. Inzhenernostroitel’nyi zhurnal. 2011. No. 7, pp. 3–10. (In Russian).
3. Ledenev V.V., Odnoliko V.G., Kolesnikova A.V. Reasons for damage and destruction of brick buildings. Vestnik TGTU. 2014. Vol. 20. No. 1, pp. 141–149. (In Russian).
4. Lesovik V.S., Zagorodnyuk L.Kh., Chulkova I.L. Law affinity structures in materials science. Fundamental’nye issledovaniya. 2014. No.3. Part2, pp.267–271. (InRussian).
5. Lesovik V.S., Zagorodnyuk L.Kh., Belikov D.A., Shchekina A.Yu., Kuprina A.A. Efficient dry mixes for repair and restoration works. Stroitel’nye Materialy [Construction Materials]. 2014. No. 7, pp. 82–85. (In Russian).
6. Lesovik V.S., Chulkova I.L., Zagordnyuk L.Kh., Volodchenko A.A., Popov D.Y. The role of the law of affinity structures in the construction material science by performance of the restoration works. Research Journal of Applied Sciences. 2014. No. 9, pp. 1100–1105.
7. Lesovik V.S., Zagorodnuk L.H, Tolmacheva M.M., Smolikov A.A., Shekina A.Y., Shakarna M.H.I. Structureformation of contact layers of composite materials. Life Science Journal. 2014. No. 11 (12s), pp. 948–953.
8. Kuprina А.А., Lesovik V.S., Zagorodnuk L.H., Elistratkin M.Y. Kuprina A.A. Anisotropy of materials properties of natural and man-triggered origin. Research Journal of Applied Sciences. 2014. No. 9, pp. 816–819.

Print   Email