Classification and Coding of Elements for Needs of Construction Industry

Number of journal: №12-2016
Autors:

I.V. KARAKOZOVA

DOI: https://doi.org/10.31659/0585-430X-2016-744-12-64-67
УДК: 624

 

AbstractAbout AuthorsReferences
Theoretical issues of creating the information system for construction industry as related to the development of classification of various elements, for example, objects, types of works, structural solutions, products, semi-finished products, building machines, mechanisms etc. are considered. Brief information on the classification systems and approaches to coding which are currently used in construction is presented. It is noted that it is better to use the facet-hierarchical method of classification and the successive method of coding. The order of the code formation with the use of a classifier OKPD 2 for an individual element of the classification is presented on the example of an educational object. The formation of the classifier of structural solutions of buildings and structures as well as the creation of the code of some elements on the basis of the classifier OKPD 2 is shown on the example of an aboveground part of the building.
I.V. KARAKOZOVA, Candidate of Sciences (Engineering), Head of Department of Methodology, Development and Actualization of Normative-Methodical Documents in Construction (This email address is being protected from spambots. You need JavaScript enabled to view it.)

State Autonomous Institution of Moscow «Scientific Research Center» (GAU «NIATS») (27, 1st Brestskaya Street, 125047, Moscow, Russian Federation)

1. Pavlov A. S. Peredacha informatsii i raspoznavanie ob'ektov v sistemakh stroitel’nogo proektirovaniya [Information transfer and recognition of objects in systems of construction designing]. Moscow: Novoe tysyacheletie, 2003. 272 p.
2. Karakozova I. V. The importance of regulation of resources in a construction increases. Economy and an entrepreneurship. 2013. No. 8 (37), pp. 280–282.
3. Talapov V.V. Osnovy BIM: vvedenie v informatsionnoe modelirovanie zdaniy [BIM bases: introduction in information modeling of buildings]. Moscow: DMK Press, 2011. 392 p.
4. Karakozova I.V., Pavlov A.S. New principles of codification of material resources and works in construction. International Journal of Applied Engineering Research. 2015. Vol. 10. No. 23, pp. 43450–43455.
5. Karakozova I.V. Prerequisites of creation of the general branch informational system in construction. MATEC Web of Conferences. 2016. 73, 07014. TPACEE-2016.
6. Gradostroitel’nyi kodeks goroda Moskvy. Utverzhden zakonom goroda Moskvy [Town-planning code of the city of Moscow]. No. 28 is approved by the law of the city of Moscow of 25.06.2008.
7. Pravila standartizatsii PR 50.1.019–2000 «Osnovnye polozheniya edinoi sistemy klassifikatsii i kodirovaniya tekhniko-ekonomicheskoi i sotsial’noi informatsii i unifitsirovannykh sistem dokumentatsii v Rossiiskoi Federatsii» [Rules of standardization of PR 50.1.019– 2000 “Basic provisions of a single classification system and coding of technical and economic and social information and the unified systems of documentation in the Russian Federation”]. No. 409 Sr. are accepted and put into operation by the Resolution of Gosstandart of Russia of December 25, 2000.
8. Pravila standartizatsii PR 50.1.024–2005 «Osnovnye polozheniya i poryadok provedeniya rabot po razrabotke, vedeniyu i primeneniyu obshcherossiiskikh klassifikatorov». [Rules of standardization of PR 50.1.024–2005 “Basic provisions and order of work on development, maintaining and use of the all-Russian qualifiers”]. No. 311 Sr. are accepted and put into operation by the Order of Federal Agency for Technical Regulation and Metrology of December 14, 2005.
9. Obshcherossiiskii klassifikator produktsii [The AllRussian Product Classifier] OK 005–93, No. 301 which is put into operation by the resolution of Gosstandart of Russia of 30.12.1993.
10. Obshcherossiiskii klassifikator produktsii po vidam ekonomicheskii deyatel’nosti [The All-Russian Product Classifier by types economic activities] OK 034–2014 (KPES 2008), put into operation by the Order of Federal Agency for Technical Regulation and Metrology of 31.01.2014 No. 14 Sr.

For citation: 


Print   Email