Ceramic Materials of Low-Melting Clays Modified with Industrial Waste of Petrochemical Complex Enterprises

Number of journal: №12-2016
Autors:

A.M.SALAKHOV
V.P. MOROZOV
O.N. LIS
M.V. PASYNKOV

DOI: https://doi.org/10.31659/0585-430X-2016-744-12-46-50
УДК: 691.41

 

AbstractAbout AuthorsReferences
The possibility to produce wall ceramic materials with high strength characteristics by means of modification of low-melting clays is shown. The waste of petrochemical enterprises of the Republic of Tatarstan is used as modifiers. The structure and mineral composition of the materials produced have been studied. A pilot batch of brick was manufactured at one of the brick factories. A comparison of characteristics of ceramic stone of clinker from the pilot party with the foreign clinker supplied by import is made. It is shown that structures, material, mineralogical compositions and physical-technical characteristics of both materials are very similar that opens the possibility of import substitution. It is shown that the use of modifiers on the basis of co-products of petrochemical plants can significantly and positively influences on reducing the energy consumption of wall ceramic production and improving its competitiveness.
A.M.SALAKHOV1,4,Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
V.P. MOROZOV2 , Doctor of Sciences (Geology and Mineralogy);
O.N. LIS1,3, Student,
M.V. PASYNKOV1,3, Student

1 Kazan Federal University. Institute of Physics (18, Kremlyovskaya Street, 420008, Kazan, Russian Federation)
2 Kazan Federal University. Institute of Geology and Petroleum Technologies
3 Kazan Federal University. Quantum Technologies Center 4 OAO «Alekseevskaya Keramika» (10, Kirpichnozavodskaya Street, town settlement Alekseevskoye, Republic of Tatarstan, 422900, Russina Federation)

1. Mustafin N.R., Ashmarin G.D. Building ceramics on the basis of local clay rocks and aluminum-karbonatosodezhaschih isopropyl production waste. Steklo i keramika. 2006. No. 9, pp. 17–18. (In Russian).
2. Mustafin N.R., Ashmarin G.D. Die klinkerkeramik auf grund des kieselerderohstoffes und der technogenischen abfallstoffe. Keramische Zeitschrift. 2006. No. 4, pp. 80–81. (In Germany).
3. Faizullin I.E. Economy of production of clinker. Materials XVAcademic readings RAACS “Achievements and Problems of Materials Science and modernization of the construction industry”. Kazan. 2010.
4. Morozova S.V., Permyakov E.N., Kornilov A.V., Lygina T.Z., Grevtsev V.A. Clay based ceramics polymineral fusible clays. Materials XV Academic readings RAACS “Achievements and Problems of Materials Science and modernization of the construction industry”. Kazan. 2010. (In Russian).
5. Saenko Je.G., Korepanova V.F., Grinfel’d G.I. Capabilities of faсade clinker brick of «LSR» brand to substitute import. Stroitel’nye Materialy [Construction Materials]. 2016. No. 4, pp. 60–63. (In Russian).

For citation: 


Print   Email