AbstractAbout AuthorsReferences
The possibility of increasing of the operating parameters of sheet antifriction materials at change of composition of composites based on polytetrafluoroethylene and enhance of the adhesive bond of the polymer composites to a metal substrate are considered. Analysis of the tribological characteristics ensures reliable screening of the dates of operation of construction machinery and transport in different climatic conditions, including the Russian North and the Arctic
V.N. KORNOPOL’TSEV, Candidate of Science (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
D.M. MOGNONOV, Doctor of Science (Chemistry) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
O. Zh. AYUROVA, Candidate of Science (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
D.M. MOGNONOV, Doctor of Science (Chemistry) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
O. Zh. AYUROVA, Candidate of Science (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
Baikal Institute of Nature Management Siberian Branch of the Russian Academy of Science (6, Sakhyanovoy street, Republic of Buryatia, Ulan-Ude, 670047, Russian Federation)
1. Akhverdiyev K.S., Vorontsov P.A., Semenov A.P. Raschet i konstruirovanie gidrodinamicheskikh podshipnikov skol’zheniya s metallopolimernymi vkladyshami [Calculation and design of hydrodynamic plain bearings with metal-polymer liners]. Rostov on Don: Publishing office of the Rostov state transport university. 1999. 205 p.
2. Patent RF #1418999. Sposob polucheniya bimetallicheskogo metalloftoroplastovogo materiala [The method of producing of bimetallic metal-fluoroplastic material] Kornopol’tsev N.V. 20.10.1993. (In Russian).
3. Patent RF #2277997. Sposob polucheniya kombinirovannogo metalloftoroplastovogo materiala [The method of producing of combined metal-fluoroplastic material] Buznik V.M., Kornopol’tsev V.N., Kornopol’tsev N.V., Mognonov D.M., Rogov V.E. Declared 21.10.2004. Published 20.06.2006. Bulletin No. 17. (In Russian).
4. Pogosyan A.K. Trenie i iznos napolnennykh polimernykh materialov [Friction and wear of filled polymer materials]. Moscow: Nauka. 1977. 137 p.
5. Istomin N.P., Semenov A.P. Antifriktsionnye svoistva kompozitsionnykh materialov na osnove ftorpolimerov [Anti-friction properties of composite materials based on fluoropolymers]. Moscow: Nauka. 1981. 131 p.
6. Voroshnin L.G., Abacharaev M.M., Khusid B.M. Kavitatsionnostoikie pokrytiya na zhelezouglerodistykh splavakh [Cavitation resistant coating on iron-carbon alloys]. Minsk: Nauka i technika. 1987. 248 p.
7. Patent of Australia № 582577. Bearing material and method of making PTFE based tape suitable for impregnation into a porous metal matrix of the bearing material / Pratt G.C., Montpetit M.C., Lytwynec M.D. AU-B-41845/85. 1985.
8. Pratt G.C. Plastic-Based Bearing – Lubrication and Lubricants. Ed. E.R. Braithwaite. Amsterdam; London; New York: Elsevier Publ. Co. 1967, pp. 377–426.
9. Kornopol’tsev V.N., Kornopol’tsev N.V., Mognonov D.M. et al. Optimization of the composition of metalfluoroplastic material on the steel substrate. Khimiya v interesakh ustoichivogo razvitiya. 2005. No. 13, pp. 757–765. (In Russian). 10. Kornopol’tsev V.N., Kornopol’tsev N.V., Mognonov D.M. Tests of metal-fluoroplastic sheet anti-friction materials at sliding speeds up to 3 m/s. Trenie i iznos. 2009. Vol.30. No. 4, pp. 385–389. (In Russian).
11. Kornopol’tsev V.N., Mognonov D.M. Lead dioxide as a modifier of composite materials based on polytetrafluoroethylene. Voprosy materialovedeniya. 2010. No. 1, pp. 72–77. (In Russian).
12. Basin V.E. Adgezionnaya prochnost’ [The adhesion strength]. Moscow: Khimiya. 1981. 208 p.
13. Kinlock E. Adgeziya i adgezivy [Adhesion and Adhesives]. Moscow: Mir. 1991. 485 p.
14. Wu S. Interfacial energy, surface structure and adhesion between the polymers. Polymer blends. Under red. D. Paul and S. Newman. Vol. 1. Moscow: Mir. 1981, pp. 282–336.
15. Ayurova O.Zh., Kornopol’tsev V.N., Mognonov D.M., Maksanova L.A. Adhesion of PTFE-film to metal surfaces. Voprosy materialovedeniya. 2011. No. 3 (67), pp. 96–100. (In Russian).
16. Patent RF #2490371. Sposob polucheniya ftoroplastovogo antiadgezionnogo pokrytiya na metallicheskikh poverkhnostyakh [A method of producing of fluoroplastic antiadhesive coating on the metal surfaces]. Kornopol’tsev V.N., Mognonov D.M., Ayurova O.Zh., Burdukovskiy V.F., Kholhoev B.Ch. Declared 19.04.2012. Published 20.08.2013. Bulletin No. 23. (In Russian).
17. Paul D. Interfacial additives to promote compatibility in polymer blends. Polymer blends. Under red. D. Paul and S. Newman. Vol. 2. Moscow: Mir. 1981, pp. 39–67.
18. Freidin A.S. Prochnost’ i dolgovechnost’ kleevykh soedineniy [The strength and durability of adhesive joints]. Moscow: Chemistry. 1971. 256 p.
2. Patent RF #1418999. Sposob polucheniya bimetallicheskogo metalloftoroplastovogo materiala [The method of producing of bimetallic metal-fluoroplastic material] Kornopol’tsev N.V. 20.10.1993. (In Russian).
3. Patent RF #2277997. Sposob polucheniya kombinirovannogo metalloftoroplastovogo materiala [The method of producing of combined metal-fluoroplastic material] Buznik V.M., Kornopol’tsev V.N., Kornopol’tsev N.V., Mognonov D.M., Rogov V.E. Declared 21.10.2004. Published 20.06.2006. Bulletin No. 17. (In Russian).
4. Pogosyan A.K. Trenie i iznos napolnennykh polimernykh materialov [Friction and wear of filled polymer materials]. Moscow: Nauka. 1977. 137 p.
5. Istomin N.P., Semenov A.P. Antifriktsionnye svoistva kompozitsionnykh materialov na osnove ftorpolimerov [Anti-friction properties of composite materials based on fluoropolymers]. Moscow: Nauka. 1981. 131 p.
6. Voroshnin L.G., Abacharaev M.M., Khusid B.M. Kavitatsionnostoikie pokrytiya na zhelezouglerodistykh splavakh [Cavitation resistant coating on iron-carbon alloys]. Minsk: Nauka i technika. 1987. 248 p.
7. Patent of Australia № 582577. Bearing material and method of making PTFE based tape suitable for impregnation into a porous metal matrix of the bearing material / Pratt G.C., Montpetit M.C., Lytwynec M.D. AU-B-41845/85. 1985.
8. Pratt G.C. Plastic-Based Bearing – Lubrication and Lubricants. Ed. E.R. Braithwaite. Amsterdam; London; New York: Elsevier Publ. Co. 1967, pp. 377–426.
9. Kornopol’tsev V.N., Kornopol’tsev N.V., Mognonov D.M. et al. Optimization of the composition of metalfluoroplastic material on the steel substrate. Khimiya v interesakh ustoichivogo razvitiya. 2005. No. 13, pp. 757–765. (In Russian). 10. Kornopol’tsev V.N., Kornopol’tsev N.V., Mognonov D.M. Tests of metal-fluoroplastic sheet anti-friction materials at sliding speeds up to 3 m/s. Trenie i iznos. 2009. Vol.30. No. 4, pp. 385–389. (In Russian).
11. Kornopol’tsev V.N., Mognonov D.M. Lead dioxide as a modifier of composite materials based on polytetrafluoroethylene. Voprosy materialovedeniya. 2010. No. 1, pp. 72–77. (In Russian).
12. Basin V.E. Adgezionnaya prochnost’ [The adhesion strength]. Moscow: Khimiya. 1981. 208 p.
13. Kinlock E. Adgeziya i adgezivy [Adhesion and Adhesives]. Moscow: Mir. 1991. 485 p.
14. Wu S. Interfacial energy, surface structure and adhesion between the polymers. Polymer blends. Under red. D. Paul and S. Newman. Vol. 1. Moscow: Mir. 1981, pp. 282–336.
15. Ayurova O.Zh., Kornopol’tsev V.N., Mognonov D.M., Maksanova L.A. Adhesion of PTFE-film to metal surfaces. Voprosy materialovedeniya. 2011. No. 3 (67), pp. 96–100. (In Russian).
16. Patent RF #2490371. Sposob polucheniya ftoroplastovogo antiadgezionnogo pokrytiya na metallicheskikh poverkhnostyakh [A method of producing of fluoroplastic antiadhesive coating on the metal surfaces]. Kornopol’tsev V.N., Mognonov D.M., Ayurova O.Zh., Burdukovskiy V.F., Kholhoev B.Ch. Declared 19.04.2012. Published 20.08.2013. Bulletin No. 23. (In Russian).
17. Paul D. Interfacial additives to promote compatibility in polymer blends. Polymer blends. Under red. D. Paul and S. Newman. Vol. 2. Moscow: Mir. 1981, pp. 39–67.
18. Freidin A.S. Prochnost’ i dolgovechnost’ kleevykh soedineniy [The strength and durability of adhesive joints]. Moscow: Chemistry. 1971. 256 p.
For citation: