AbstractAbout AuthorsReferences
The influence of the addition of gypsum on the properties of the plasticized fluoroanhydrite binder was investigated. It has been shown that by introducing gypsum it is possible to purposefully influence the setting time of the fluoroanhydrite composition, varying them within wide limits from 3 hours to 14 minutes. Binders based on a mixture with a percentage of fluoroanhydrite/gypsum in the amount of 94/6 and 95.5/4.5 can be used for the manufacture of waterproof moldings, including architectural details, sculpture and decorative stone. Experimental testing of the developed fluoroanhydrite-gypsum material has shown its high efficiency. The involvement of fluoroanhydrite in the production of building materials and products provides economic and environmental benefits.
D.A. KALABINA, Engineer (postgraduate student) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
A.M. ALEXANDROV, Engineer (postgraduate student) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
G.I. YAKOVLEV, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
A.M. ALEXANDROV, Engineer (postgraduate student) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
G.I. YAKOVLEV, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
Kalashnikov Izhevsk State Technical University (7, Studencheskaya Street, Izhevsk, 426069, Russian Federation)
1. Samigov N.A., Atakuziev T.A., Asamatdinov M.O., Akhundzhanova S.R. Physicochemical structure and properties of waterproof and high-strength composite gypsum binders. Universum: Technical sciences. 2015. No. 10 (21). (In Russian).
2. Korovyakov V.F. Increasing the water resistance of gypsum binders and expanding their areas of application. Stroitel’nye Materialy, oborudovaniye, tekhnologii XXI veka. 2005. No. 3, pp. 28–31. (In Russian).
3. Patent RU2081076C1. Vyazhushchee [Binder]. Panchenko A.I., Airapetov G.A., Nesvetaev G.V., Nechushkin A.Yu. Appl. 06/10/1994; Publ. 10.06.1997. https://patentimages.storage.googleapis.com/2d/07/56/e02a208d3e2302/RU2081076C1.pdf (In Russian).
4. Tesárek P., Rovnaníková P., Kolísko J., Černý R. Properties of hydrophobized FGD gypsum. Cement-wapno-beton. 2005. Vol. 5, pр. 255–264.
5. Gordina A.F., Yakovlev G.I., Polyanskikh I.S., Kerene Ya., Fisher Kh.-B., Rakhimova N.R., Buryanov A.F. Plaster compositions with complex modifiers of structure. Stroitel’nye Materialy [Construction Materials]. 2016. No. 1–2, рр. 90–95. (In Russian).
6. Letenko D.G., Mokrova M.V., Matveeva L.Yu., Tikhonov Yu.M. The influence of the size distribution of nanomodified latex particles on the structure of gypsum materials. Vestnik grazhdanskikh inzhenerov. 2019. No. 4 (75), pp. 95–101. (In Russian). DOI 10.23968/1999-5571-2019-16-4-95-101
7. Konusheva V.V., Syrkin O.O., Steshenko A.B., Kudyakov A.I. Influence of modifying additives on gypsum water resistance. Effective formulations and technologies in building materials science: collection of the International Scientific and Technical Conference. Novosibirsk. 2017, pp. 161–163 (In Russian).
8. Solovyev V.G., Eremin A.V., Eliseev D.M., Buryanov A.F. Improvement of water resistance of gypsum binder by paraffin emulsion. Stroitel’nye Materialy [Construction materials]. 2017. No. 1–2, pp. 45–49. (In Russian).
9. Kolkataeva N.A., Garkavi M.S. The influence of styrene-acrylate emulsion on the performance properties of gypsum materials. Stroitel’nye Materialy [Construction Materials]. 2007. No. 9, pp. 50–51. (In Russian).
10. Haev T.Eh., Tkach E.V., Oreshkin D.V. Lightweight strengthened gypsum stone for restoration of architec-tural monuments. Stroitel’nye Materialy [Construction Materials]. 2018. No. 5, pp. 68–72. DOI: https://doi.org/10.31659/0585-430X-2018-759-5-68-72 (In Russian).
11. Kramar L.Ya., Trofimov B.Ya., Chernykh T.N. Properties and modification of anhydrite binder from technogenic raw materials. Collection of reports of the fifth scientific-practical conference “Innovative materials and technologies KNAUF-GARANT quality and safety in modern construction”. Chelyabinsk. 2012, pp. 30–58. (In Russian).
12. Patent RU 2723788 C1 Vysokoprochnoye ftorangidritovoye vyazhushcheye, sposob polucheniya vysokoprochnogo ftorangidritovogo vyazhushchego i kompozitsii na yego osnove (varianty) [High-strength fluoroanhydrite binder, a method of obtaining high-strength fluoroanhydrite binder and compositions based on it (options)]. Grakhov V.P., Pervushin G.N., Kalabina D.A., Yakovlev G.I. and others. Appl. 03/29/2019. Publ. 06/17/2020. (In Russian).
13. Vinogradova L.A. Tekhnologiya dekorativno-khudozhestvennykh izdelii na osnove vyazhushchikh veshchestv [Technology of decorative and artistic products based on binders]. Moscow: Yurayt Publishing House. 2021. 138 p. (In Russian).
14. Vinogradova L.A. Khudozhestvennoe materialovedenie vyazhushchikh veshchestv i tekhnologiya izgotovleniya dekorativno-otdelochnykh materialov na ikh osnove [Artistic materials science of binders and the technology of making decorative and finishing materials based on them]. Ivanovo: Ivanovo State University of Chemical Technology. 2018. 173 p. (In Russian).
15. Bondarenko S.A. Modified fluoroanhydrite binder and building materials based on it. Diss. Candidate of Sciences (Engineering). Chelyabinsk, 2008.148 p. (In Russian).
16. Kalabina D.A., Yakovlev G.I., Dufek Z., Pervu-shin G.N., Bazhenov K.A., Troshkova V.V. Fluoro-anhydrite compositions plasticized by polycarboxylate esters. Engineering Structures and Technologies. 2019. No. 11 (3), pp. 101–105. DOI: https://doi.org/10.3846/est.2019.11949
2. Korovyakov V.F. Increasing the water resistance of gypsum binders and expanding their areas of application. Stroitel’nye Materialy, oborudovaniye, tekhnologii XXI veka. 2005. No. 3, pp. 28–31. (In Russian).
3. Patent RU2081076C1. Vyazhushchee [Binder]. Panchenko A.I., Airapetov G.A., Nesvetaev G.V., Nechushkin A.Yu. Appl. 06/10/1994; Publ. 10.06.1997. https://patentimages.storage.googleapis.com/2d/07/56/e02a208d3e2302/RU2081076C1.pdf (In Russian).
4. Tesárek P., Rovnaníková P., Kolísko J., Černý R. Properties of hydrophobized FGD gypsum. Cement-wapno-beton. 2005. Vol. 5, pр. 255–264.
5. Gordina A.F., Yakovlev G.I., Polyanskikh I.S., Kerene Ya., Fisher Kh.-B., Rakhimova N.R., Buryanov A.F. Plaster compositions with complex modifiers of structure. Stroitel’nye Materialy [Construction Materials]. 2016. No. 1–2, рр. 90–95. (In Russian).
6. Letenko D.G., Mokrova M.V., Matveeva L.Yu., Tikhonov Yu.M. The influence of the size distribution of nanomodified latex particles on the structure of gypsum materials. Vestnik grazhdanskikh inzhenerov. 2019. No. 4 (75), pp. 95–101. (In Russian). DOI 10.23968/1999-5571-2019-16-4-95-101
7. Konusheva V.V., Syrkin O.O., Steshenko A.B., Kudyakov A.I. Influence of modifying additives on gypsum water resistance. Effective formulations and technologies in building materials science: collection of the International Scientific and Technical Conference. Novosibirsk. 2017, pp. 161–163 (In Russian).
8. Solovyev V.G., Eremin A.V., Eliseev D.M., Buryanov A.F. Improvement of water resistance of gypsum binder by paraffin emulsion. Stroitel’nye Materialy [Construction materials]. 2017. No. 1–2, pp. 45–49. (In Russian).
9. Kolkataeva N.A., Garkavi M.S. The influence of styrene-acrylate emulsion on the performance properties of gypsum materials. Stroitel’nye Materialy [Construction Materials]. 2007. No. 9, pp. 50–51. (In Russian).
10. Haev T.Eh., Tkach E.V., Oreshkin D.V. Lightweight strengthened gypsum stone for restoration of architec-tural monuments. Stroitel’nye Materialy [Construction Materials]. 2018. No. 5, pp. 68–72. DOI: https://doi.org/10.31659/0585-430X-2018-759-5-68-72 (In Russian).
11. Kramar L.Ya., Trofimov B.Ya., Chernykh T.N. Properties and modification of anhydrite binder from technogenic raw materials. Collection of reports of the fifth scientific-practical conference “Innovative materials and technologies KNAUF-GARANT quality and safety in modern construction”. Chelyabinsk. 2012, pp. 30–58. (In Russian).
12. Patent RU 2723788 C1 Vysokoprochnoye ftorangidritovoye vyazhushcheye, sposob polucheniya vysokoprochnogo ftorangidritovogo vyazhushchego i kompozitsii na yego osnove (varianty) [High-strength fluoroanhydrite binder, a method of obtaining high-strength fluoroanhydrite binder and compositions based on it (options)]. Grakhov V.P., Pervushin G.N., Kalabina D.A., Yakovlev G.I. and others. Appl. 03/29/2019. Publ. 06/17/2020. (In Russian).
13. Vinogradova L.A. Tekhnologiya dekorativno-khudozhestvennykh izdelii na osnove vyazhushchikh veshchestv [Technology of decorative and artistic products based on binders]. Moscow: Yurayt Publishing House. 2021. 138 p. (In Russian).
14. Vinogradova L.A. Khudozhestvennoe materialovedenie vyazhushchikh veshchestv i tekhnologiya izgotovleniya dekorativno-otdelochnykh materialov na ikh osnove [Artistic materials science of binders and the technology of making decorative and finishing materials based on them]. Ivanovo: Ivanovo State University of Chemical Technology. 2018. 173 p. (In Russian).
15. Bondarenko S.A. Modified fluoroanhydrite binder and building materials based on it. Diss. Candidate of Sciences (Engineering). Chelyabinsk, 2008.148 p. (In Russian).
16. Kalabina D.A., Yakovlev G.I., Dufek Z., Pervu-shin G.N., Bazhenov K.A., Troshkova V.V. Fluoro-anhydrite compositions plasticized by polycarboxylate esters. Engineering Structures and Technologies. 2019. No. 11 (3), pp. 101–105. DOI: https://doi.org/10.3846/est.2019.11949
For citation: Kalabina D.A., Alexandrov A.M., Yakovlev G.I. Fluoroanhydrite-gypsum compositions for the manufacture of decorative architectural details and sculptural products. Stroitel’nye Materialy [Construction Materials]. 2021. No. 11, pp. 52–56. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2021-797-11-52-56