Ceramic Brick, Stones and the Full Brick Walls

Number of journal: 9-2019
Autors:

Rubtsov O.I.
Bobrova E.Yu.
Zhukov A.D.
Zinov’eva E.A.

DOI: https://doi.org/10.31659/0585-430X-2019-774-9-8-13
УДК: 691.421

 

AbstractAbout AuthorsReferences
The article presents the results of a comparative analysis of load-bearing walls made using various systems. Outlined the features of wall systems. Carried out from ceramic bricks, ceramic stones with a plaster layer and with external brickwork from facing bricks, composite systems with heat insulation. It has been established that the more complex the design (the more individual elements and materials are used in this construction), the more the probability of a critical (repair) state will increase. The degradation of the properties of each material over time (that is, a gradual decrease in the level of operational characteristics of materials and the process of their change towards deterioration relative to design values) leads to degradation of the properties of the structure as a whole, up to its destruction or unscheduled major repairs. The advantages of brick walls is a high degree of reliability, which implies a long service life without a major overhaul, a longer time between cosmetic repairs, comfort, environmental friendliness and fire resistance. Сost estimate for constructing and exploitation of different building construction was carried out.
O.I. RUBTSOV1, Candidate of Sciences (Engineering)
E.Yu. BOBROVA1, Candidate of Sciences (Economics)
A.D. ZHUKOV2, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.)
E.A. ZINOV’EVA2, Student

1 Higher School of Economics (20, Myasnitskaya Street, Moscow, 101000, Russian Federation)
2 National Research Moscow State University of Civil Engineering (26, Yaroslavskoe Highway, Moscow, 129337, Russian Federation)

1. Telichenko V.I., Oreshkin D.V. Materials science aspects of geo-ecological and environmental safety in construction. Ekologiya urbanizirovannyh territorij. 2015. No. 2, pp. 31–33. (In Russian).
2. Zhuk P.M., Zhukov A.D. Regulatory legal framework for environmental assessment of construction materials: prospects for improvement. Ekologiya i promyshlennost’ Rossii. 2018. No. 4, pp. 52–57. (In Russian).
3. Fedyuk R.S., Mochalov A.V., Simonov V.A. Trends in the development of standards for the thermal protection of buildings in Russia. Vestnik inzhenernyi shkoly DVFU. 2012. No. 2 (11), рp. 39–44. (In Russian).
4. Horny M.I. Tekhnologiya iskusstvennyh poristyh zapolnitelej i keramiki [Technology of artificial porous aggregates and ceramics]. Moscow: Ecolit. 2016. 320 p.
5. Zhukov A.D., Orlova A.M., Naumova T.A., Nikushkina, T.P., Mayorova A.A. Ecological aspects of the formation of an insulating shell of buildings. Nauchnoe obozrenie. 2015. No. 7, рp. 209–212. (In Russian).
6. Zhukov A.D., Naumova N.V., Mustafayev R.M., Mayorova N.A. Modeling the properties of highly porous materials of the combined structure. Promyshlennoe i grazhdanskoe stroitel’stvo. 2014. No. 7, рp. 48–51. (In Russian).
7. Ischuk M.K., Gogua OK, Frolova I.G. Features of the work of flexible connections in walls with a face layer of masonry. Stroitel’nye Materialy [Construction Materials]. 2018. No. 7, рp. 40–44. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2018-761-7-40-44
8. Semenov A.A. Trends in the development of the brick industry and brick housing construction in Russia. Stroitel’nye Materialy [Construction Materials]. 2018. No. 8, рp. 49–51. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2018-762-8-49-51
9. Development of the ceramic industry of Russia (Information). Stroitel’nye Materialy [Construction Materials]. 2018. No. 8, рp. 44–47. (In Russian).

For citation: Rubtsov O.I., Bobrova E.Yu., Zhukov A.D., Zinov’eva E.A. Ceramic brick, stones and the full brick walls. Stroitel’nye Materialy [Construction Materials]. 2019. No. 9, pp. 8–13. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2019-774-9-8-1