Rational Methods for Raw Material Preparation in the Wall Ceramics Technology of Compression Molding

Number of journal: №4-2016
Autors:

A.Yu. STOLBOUSHKIN
G.I. STOROZHENKO
A.I. IVANOV
V.A. SYROMYASOV
D.V. AKST

DOI: https://doi.org/10.31659/0585-430X-2016-736-4-26-30
УДК: 666.7.022

 

AbstractAbout AuthorsReferences
The rational methods for raw material preparation in the wall ceramics technology of compression molding are formulated. It is established that for the low-quality clay raw materials and industrial waste the grinding up to class -0.3 +0 mm is required. The best packaging of the fine-dispersed raw material during the molding is achieved through its preliminary aggregation in the mixer-granulators of intense action. It is found that at optimal molding pressures in the process of adobe compaction before the plastic deformation of granules at their boundaries the concentration of the liquid phase takes place due to the squeezing moisture out of the granules that contributes to sintering of the product during burning. In the industrial conditions the possibility for production of an effective facing ceramic brick by compression molding from low-quality raw material and industrial wastes with an optimal stricture, high mechanical and decorative qualities is confirmed.
A.Yu. STOLBOUSHKIN1 , Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
G.I. STOROZHENKO2 , Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
A.I. IVANOV1 , Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.),
V.A. SYROMYASOV1 , Engineer,
D.V. AKST1 , Engineer

1 Siberian State Industrial University (42, Kirov Street, Kemerovo Region, Novokuznetsk, 654007, Russian Federation)
2 «Baskey Keramik», OOO (1b, Stepana Razina Street, Chelyabinsk, 454111, Russian Federation)

1. Kramer C. Ceramic Ethnoarchaeology. Annual Review of Anthropology. 1985. No. 14, pp. 77–102.
2. Laefer D. Engineering Properties of Historic Brick: Variability Considerations as a Function of Stationary versus Nonstationary Kiln Types. Journal of the American Institute for Conservation. 2004. No. 3, pp. 255–272.
3. Ashmarin G.D. Status and prospects of development of the production base of ceramic wall materials in Russia. Stroitel’nye Materialy [Construction Materials]. 2006. No. 8, p. 6. (In Russian).
4. Ashmarin G.D., Kurnosov V.V., Belyaev S.E. et al. Substantiation of efficiency of compression molding of ceramic building materials. Stroitel’nye Materialy [Construction Materials]. 2011. No. 8, pp. 8–9. (In Russian).
5. Stolboushkin A.Yu. The theoretical basis for formation of ceramic ma-trix composites based on natural and technogenic raw materials. Stroitel’nye Materialy [Construction Materials]. 2011. No. 2, pp. 10–15. (In Russian).
6. Schlegel I.F. Problems of semidry pressing of bricks. Stroitel’nye Materialy [Construction Materials]. 2005. No. 2, pp. 18–19. (In Russian).
7. Vylomov F.A. Import substitution of building materials in Russia. Stroitel’stvo. 2015. No. 4, pp. 40–42. (http:// ancb.ru/files/pdf/pc/Otraslevoy_zhurnal_ Stroitelstvo_-_2015_god_04_2015_pc.pdf). (In Russian).
8. Grubachich B. Company BEDESCHI: the second century among the leaders of mechanical engineering for the ceramic industry Stroitel’nye Materialy [Construction Materials]. 2009. No. 4, pp. 30–31. (In Russian).
9. Rogovoy M.I. Tekhnologiya iskusstvennykh poristykh zapolnitelei i keramiki [The technology of artificial porous aggregates and ceramics]. Moscow: Stroyizdat. 1974. 315 p.
10. Storozhenko G.I., Gurov N.G., Chivelev V.D. et al. [Experimental-industrial testing of the technology of fine-grinded mineral and technogenious and clay carbonized raw materials for the production of wall ceramics]. Stroitel’nye Materialy [Construction Materials]. 2012. No. 5, pp. 48–50. (In Russian).
11. Spravochnik po proizvodstvu stroitel’noi keramiki. Tom III. Stenovaya i krovel’naya keramika [Guide to the production of building ceramics. Volume III. Wall and roof ceramics. Ed. by Skramtaeva B.G.] Moscow: Stroyizdat. 1962. 608 p.
12. Kaynarsky I.S., Lesnichenko S.L. Ogneupory [Refractories]. Moscow: Stroyizdat. 1948. 361 p.
13. Ivanov A.I., Stolboushkin A.Yu., Storozhenko G.I. Principles of creat-ing the optimal structure of a semi-dried pressed ceramic brick. Stroitel’nye Materialy [Construction Materials]. 2015. No. 4, pp. 65–69. (In Russian).
14. Stolboushkin A.Yu., Ivanov A.I., Zorya V.N. et al. Features of granulation of technogenic and natural raw materials for production of wall ceramics. Stroitel’nye Materialy [Construction Materials]. 2012. No. 5, pp. 85–89. (In Russian).

For citation: